Yeoh Cheow Keat
Thumbnail Image
Preferred name
Yeoh Cheow Keat
Official Name
Cheow Keat, Yeoh
Alternative Name
Yeoh, C. K.
Yeoh, Cheow Keat
Yeoh, Cheow-Keat
Main Affiliation
Scopus Author ID
16231574200
Researcher ID
EGP-0633-2022

Research Output

No data found

Filters

Show more
Reset filters

Settings
Now showing 1 - 2 of 2
No Thumbnail Available
Publication

Comparison between natural rubber, liquid natural rubber, and recycled natural rubber as secondary matrix in epoxy/natural rubber/graphene nano-platelet system

2023 , K. W. Kam , Teh Pei Leng , Yeoh Cheow Keat

A comparison is made between the effects of natural rubber (NR), liquid natural rubber (LNR), and recycled natural rubber (rNR) in the filled epoxy systems on the physical, mechanical, thermal, and electrical performances of filled epoxy systems. The results show that flexural strength and modulus values were improved. The toughness properties of the filled epoxy system were enhanced with NR phases (72 MPa, 2317 MPa, 4.2 MPa. m1/2), as compared to those with LNR (55 MPa, 2100 MPa, 3.2 MPa. m1/2) and rNR (52 MPa, 2000 MPa, 2.3 MPa. m1/2) at 5 vol.%. Scanning electron micrograph (SEM) analysis revealed that the particle sizes of NR phases dispersed within the epoxy matrix were smaller and more uniform (0.29-1.65 μm) as compared to those with LNR (0.64-3.57 μm) and rNR (≥250 μm) phases. The incorporation of NR, LNR, and rNR phases improved the thermal stability of the filled system. This is attributed to more heat energy being needed to overcome good interfacial bonding between epoxy matrices and the small NR phases. X-ray diffraction analysis results showed that the filled epoxy/NR/GNP system has higher 2θ values, indicating that d-spacing in GNP nano-fillers has the closer distance. Electrical bulk conductivity values of filled epoxy/NR/GNP systems were the highest, 4.50 x 10-3 1/Ω. cm at 20 vol.%. Small NR phases acted as elastomer spacers, which provided better GNP packing efficiency and realigned the GNP nano-fillers to form more effective conductive pathways for electron transport.

View
Thumbnail Image
Publication

Effect of silicone rubber on the properties of epoxy/recovered carbon black (rCB) conductive materials

2024-04 , Pei Chee Leow , Teh Pei Leng , Yeoh Cheow Keat , Wee Chun Wong , Chong Hooi Yew , Xue Yi Lim , Kai Kheng Yeoh , Nor Azura Abdul Rahim , Voon Chun Hong

The primary focus of this study is to investigate the effect of silicone rubber (SR) content on the mechanical, thermal, electrical conductivity, and morphological properties of epoxy/recovered carbon black (rCB) conductive material. The conductive material is used to produce the electrostatic discharge (ESD) tray for the electronic packaging industry. This study investigated the effect of silicone rubber content (0, 5, 10, 15, and 20 vol.%) on the properties of epoxy/SR/rCB conductive materials, with the rCB content fixed at 15 vol.% for its optimum electrical conductivity. The silicone rubber acts as a toughening agent for epoxy. Through the fracture toughness result, it can be identified that silicone rubber plays a role in improving the toughness properties of the epoxy/SR/rCB conductive material. The optimum results for mechanical properties were recorded at 5 vol.% SR. The addition of SR to the epoxy matrix enhances the electrical properties of the epoxy/SR/rCB conductive material. The effect of thermal aging on epoxy/SR/rCB conductive materials was also studied to determine the properties of the conductive material materials at high temperatures for a long period of time. After thermal aging, the mechanical, thermal, electrical conductivity, and morphological properties of the epoxy/SR/rCB conductive material were slightly reduced.

View