Now showing 1 - 2 of 2
  • Publication
    Physical and mechanical analysis of paddy leaves charcoal briquettes
    (IOP Publishing, 2020)
    Noor Zulaika Salleh Morgan
    ;
    ;
    Paddy leaves can be used to make charcoal briquettes and good as renewable energy sources. The charcoal briquettes were pressed at a pressure range of 50 – 90 bars using the cold press machine. This paper reports the physical and mechanical properties of charcoal briquettes produced from paddy leaves. The moisture content of paddy leaves charcoal briquettes was calculated after dried in an oven at 80°C until the briquettes reached a constant weight. Then, the paddy leaves charcoal briquettes were subjected to the Compression Test with a maximum load capacity of 500kg and crosshead speed of 0.305 mm/min until the briquettes came to a failure as for the investigation of its compressive strength. The average moisture content of paddy leaves charcoal briquettes were in the range of 7-8%. The lowest value of moisture content was 7.32%, recorded by CB5 charcoal briquette sample which, contributed to the highest value of its compressive strength. Its compressive strength was 2.176 MPa. The investigation showed that CB5 was the best charcoal briquette, and the compressive strength was affected by the moisture content in the paddy leaves charcoal briquettes.
      4  8
  • Publication
    Comparison of corn and tapioca starch binders on the characteristic of rice straw charcoal briquettes
    (Springer, 2023-09) ; ;
    Noor Zulaika Salleh Morgan
    ;
    Hazmi Helmi Saroni
    Agricultural waste was abundant and commonly burnt on the landfilled due to no significant uses. Rice straw was rarely used in proper scientific work for the production of charcoal briquettes. Rice straw can be converted into an alternative charcoal briquette which is used for generating heat energy. However, the suitable type and concentration of binder used for the briquette production were still unclear. The aim of this study is to make the properties comparison between corn and tapioca starch as binder used in rice straw charcoal briquettes. Chopped rice straw was combusted in oven at 260 °C for 4 h in order to produce char powder. Each kind of starch and char powder was thoroughly mixed together and then compacted into charcoal briquettes by using a carbon steel die. Charcoal briquette samples were then analysed for volatile matter, fixed carbon, moisture content, ash content and burning rate. It was found that corn and tapioca starch binders with different binder concentrations affect slightly different characters and properties of charcoal briquettes product.
      4  5