Options
Siti Khalijah Mahmad Rozi
Preferred name
Siti Khalijah Mahmad Rozi
Official Name
Siti Khalijah, Mahmad Rozi
Alternative Name
Rozi, Siti Khalijah Mahmad
Rozi, S.K.M
Mahmad Rozi, S.K
Main Affiliation
Scopus Author ID
57190815094
Now showing
1 - 3 of 3
-
PublicationAmine functionalized carbon-based soybean curd residues (SCR) as potential adsorbent for carbon dioxide adsorption( 2021-05-24)
;Zakaria D.S. ; ;Mohamad S.Currently, carbon dioxide (CO2) capture can preserve environmental quality by using carbon- based adsorbent. In this research, Polyethylenehexamine (PEHA) functionalized carbon-based soybean curd residues (carbonized SCR-PEHA) was prepared for CO2 adsorption. Analysis of functional groups of the prepared adsorbent using Fourier Transform Infrared Spectroscopy (FTIR), confirmed the functionalization of PEHA on the carbonized SCR. CO2 uptake of the carbonized SCR-PEHA was compared with the bare SCR using Thermogravimetric Analyzer (TGA) analysis. TGA results revealed that the adsorption capacity of CO2 for carbonized SCR-PEHA and bare SCR are 8.816 mg/g and 3.027 mg/g respectively. It was observed that functionalization of the PEHA on the surface of carbonized SCR had improved the adsorption capacity of CO2 by 2.92 times as compared to bare SCR. The phenomenon can be explained from the interaction of the CO2 with the available amine sites provided for the carbonized SCR-PEHA which significantly improved the CO2 adsorption. Hence, the carbonized SCR-PEHA demonstrate potential adsorbent for CO2. -
PublicationEnhanced Adsorption of Carbon Dioxide by Phosphoric Acid-Modified Soybean Curd Residue Biochar( 2022-01-01)
;Zakaria D.S. ; ; ;Mohamad S.Mat Hussin S.A.Biochar is being increasingly applied for carbon dioxide (CO2) capture to preserve environmental quality. The use of soybean waste, soybean curd residue (SCR) as CO2 adsorbents can help to reduce the uncontrolled disposal of SCR. In this research, SCR-based biochar (Biochar@SCR) was prepared by pyrolysis process. For chemical activation, Biochar@SCR was immersed for 12 hours in 42.5 wt.% H3PO4 solution at 1:1 ratio (g precursor/g H3PO4) to obtain Biochar@SCR-M1. Biochar@SCR-M2 was produced when Biochar@SCR-M1 was pyrolyzed again at 5000C for 2 hours. Elemental and functional groups analyses showed the presence of elemental phosphorus (P) and functional groups of P=O or P=OOH for Biochar@SCR-M1 and Biochar@SCR-M2, suggesting the chemical modification using H3PO4 was successful. Morphological analysis revealed the formation of pores after the pyrolysis process and chemical treatment with H3PO4. Analysis of CO2 adsorption depicted that the adsorption capacities of SCR, Biochar@SCR, Biochar@SCR-M1, and Biochar@SCR-M2 were 3.00 mg/g, 25.21 mg/g, 30.50 mg/g, and 36.00 mg/g, respectively. This result proved the increased CO2 sorption for H3PO4-treated Biochar@SCR, suggesting that phosphoric acid modification is an effective method for preparing biochar with high carbon dioxide adsorption.27 4 -
PublicationNew porous amine-functionalized biochar-based desiccated coconut waste as efficient CO2 adsorbents( 2024-03-01)
;Zakaria D.S. ; ; ;Mohamad S.Zheng G.K.Climate change caused by the greenhouse gases CO2 remains a topic of global concern. To mitigate the excessive levels of anthrophonic CO2 in the atmosphere, CO2 capture methods have been developed and among these, adsorption is an especially promising method. This paper presents a series of amine functionalized biochar obtained from desiccated coconut waste (amine-biochar@DCW) for use as CO2 adsorbent. They are ethylenediamine-functionalized biochar@DCW (EDA-biochar@DCW), diethylenetriamine-functionalized biochar@DCW (DETA-biochar@DCW), triethylenetetramine-functionalized biochar@DCW (TETA-biochar@DCW), tetraethylenepentamine-functionalized biochar@DCW (TEPA-biochar@DCW), and pentaethylenehexamine-functionalized biochar@DCW (PEHA-biochar@DCW). The adsorbents were obtained through amine functionalization of biochar and they are characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, Brunauer–Emmett–Teller (BET), and thermogravimetric analysis (TGA). The CO2 adsorption study was conducted isothermally and using a thermogravimetric analyzer. From the results of the characterization analyses, a series of amine-biochar@DCW adsorbents had larger specific surface area in the range of 16.2 m2/g–37.1 m2/g as compare to surface area of pristine DCW (1.34 m2/g). Furthermore, the results showed an increase in C and N contents as well as the appearance of NH stretching, NH bending, CN stretching, and CN bending, suggesting the presence of amine on the surface of biochar@DCW. The CO2 adsorption experiment shows that among the amine modified biochar adsorbents, TETA-biochar@DCW has the highest CO2 adsorption capacity (61.78 mg/g) when using a mass ratio (m:m) of biochar@DCW:TETA (1:2). The adsorption kinetics on the TETA-biochar@DCW was best fitted by the pseudo-second model (R2 = 0.9998), suggesting the adsorption process occurs through chemisorption. Additionally, TETA-biochar@DCW was found to have high selectivity toward CO2 gas and good reusability even after five CO2 adsorption–desorption cycles. The results demonstrate the potential of novel CO2 adsorbents based on amine functionalized on desiccated coconut waste biochar. Graphical Abstract: (Figure presented.)2 30