Sinar Arzuria Adnan
Thumbnail Image
Preferred name
Sinar Arzuria Adnan
Official Name
Sinar Arzuria, Adnan
Alternative Name
Sinar, A.A.
Arzuria Adnan, Sinar
Adnan, Sinar Arzuria
Main Affiliation
Scopus Author ID
55899850500
Researcher ID
FZO-8888-2022

Research Output

Filters

2 1
2
2
Reset filters

Settings
Now showing 1 - 2 of 2
Thumbnail Image
Publication

Thermoplastic starch hybrid biocomposite films with improved strength and flexibility produced through crosslinking via carboxylic acid

2023 , Di Sheng Lai , Azlin Fazlina Osman , Sinar Arzuria Adnan , Ismail Ibrahim , Midhat Nabil Ahmad Salimi , Mariatti Jaafar @ Mustapha

Thermoplastic starch (TPS) suffers from its intrinsic low mechanical strength and high brittleness due to its strong hydrogen bonding and low chain mobility. The conventional way to crosslink the TPS film can improve the strength and stiffness of the films, but usually reduces the flexibility of the film, and increases its brittleness. In this study, the incorporation of the hybrid nanofiller [1 wt% nanocellulose (C) and 4 wt% nano bentonite (B)] into the TPS proved to improve greatly the films’ strength and flexibility. The hybrid nanofillers with ratio 4B:1C was incorporated into the crosslinked thermoplastic corn starch (CR-TPCS) film to increase the its flexibility and toughness and produced a high mechanical strength fully biodegradable film. Two different aqueous carboxylic acids: citric acid (CA) and tartaric acid (TA) with different pH values (2,4,6) as the green crosslinker were employed. Substantial increase of tensile strength (3.98 to 9.17 MPa), Young’s modulus (9.10 to 46.30 MPa) and elongation at break (55.2 to 135.7%) was observed for the CA- 4B1C/pH2 films compared to the CR-TPCS films. The melting temperature (Tm) of the CA-4B1C/pH2 improved compared to the TPCS/4B1C (un-crosslinked) film due to its crosslinking effect. Meanwhile, the CA-4B1C films exhibited the highest degree of substitution and di-esterification with the lowest swelling and water solubility properties due to the formation of a special “bridge” structure between the CA, nanocellulose and plasticizer. The “bridge” structure developed between the TPCS chains serves as the toughener to motivate higher chain stress relaxation and load endurance. The crosslinked “bridge structure” also proved to effectively reduce the retrogradation phenomenal in the TPCS films. This combination method of hybridization and crosslinking is an efficient, low cost, and environmentally friendly technique to overcome the low flexibility and brittleness problem of the TPS based packaging film.

View
Thumbnail Image
Publication

The role of natural hybrid nanobentonite/nanocellulose in enhancing the water resistance properties of the biodegradable thermoplastic starch

2023 , Di Sheng Lai , Azlin Fazlina Osman , Sinar Arzuria Adnan , Ismail Ibrahim , Andrei Victor Sandu , Shayfull Zamree Abd. Rahim , Petrica Vizureanu

This study focuses on investigating the effect of hybrid nanofillers on the hydration characteristics and soil biodegradability of the thermoplastic corn starch (TPCS) hybrid nanofiller biocomposite (TPCS-HB) films. The data were benchmarked with that of the pure TPCS and TPCS single nanofiller biocomposite (TPCS-SB) as control films. The water absorption properties of TPCS, TPCS-SB, and TPCS-HB films were analyzed and fitted with the standard Guggenheim–Anderson–de Boer equation to study the water activity of the films. Besides, the water permeability test, water vapor permeability, and soil biodegradability of the films were also studied and correlated with the films’ surface morphology. The results indicated that the TPCS-HB films possess excellent hydration resistance and comparable biodegradable rate with the TPCS-SB films. The optimal water resistance properties were achieved when the optimal ratio of nanobentonite/nanocellulose (4:1) was incorporated into the TPCS matrix. The outcomes of this study provide an innovative idea and new insights that, by using natural and hybrid nanofillers, the hydrophobicity of the TPCS films could be enhanced. TPCS-HB films show great potential to be developed into a fully green biodegradable TPCS biocomposite film, especially for single-use plastic applications.

View