Hoo Peng Yong
Thumbnail Image
Preferred name
Hoo Peng Yong
Official Name
Hoo, Peng Yong
Translated Name
Yong Hoo
Alternative Name
Hoo, P. Y.
Peng, Yong Hoo
Hoo, Pengyong
Main Affiliation
Scopus Author ID
56149784600

Research Output

Filters

1 1
4
2 2
Reset filters

Settings
Now showing 1 - 4 of 4
  • Publication
    Synthesis and Characterisation of Self-Cleaning TiO2/PES Mixed Matrix Membranes in the Removal of Humic Acid
    ( 2023-04-01)
    Poon Y.K.
    ;
    Siti Kartini Enche Ab Rahim
    ;
    Ng Qi Hwa
    ;
    Hoo Peng Yong
    ;
    Abdullah N.Y.
    ;
    Amira Mohd Nasib
    ;
    Abdullah N.S.
    Membrane application is widespread in water filtration to remove natural organic matter (NOM), especially humic acid. However, there is a significant concern in membrane filtration, which is fouling, which will cause a reduction in the membrane life span, a high energy requirement, and a loss in product quality. Therefore, the effect of a TiO2/PES mixed matrix membrane on different concentrations of TiO2 photocatalyst and different durations of UV irradiation was studied in removing humic acid to determine the anti-fouling and self-cleaning effects. The TiO2 photocatalyst and TiO2/PES mixed matrix membrane synthesised were characterised using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray powder diffraction (XRD), scanning electron microscope (SEM), contact angle, and porosity. The performances of TiO2/PES membranes of 0 wt.%, 1 wt.%, 3 wt.%, and 5 wt.% were evaluated via a cross-flow filtration system regarding anti-fouling and self-cleaning effects. After that, all the membranes were irradiated under UV for either 2, 10, or 20 min. A TiO2/PES mixed matrix membrane of 3 wt.% was proved to have the best anti-fouling and self-cleaning effect with improved hydrophilicity. The optimum duration for UV irradiation of the TiO2/PES mixed matrix membrane was 20 min. Furthermore, the fouling behaviour of mixed matrix membranes was fitted to the intermediate blocking model. Adding TiO2 photocatalyst into the PES membrane enhanced the anti-fouling and self-cleaning properties.
  • Publication
    Parameters adjustments for facile synthesis of high magnetization iron oxide nanoparticles from natural sand
    ( 2024-02-01)
    Wahfiudin A.
    ;
    Pramata A.D.
    ;
    Wicaksono S.T.
    ;
    Ng Qi Hwa
    ;
    Amira Mohd Nasib
    ;
    Siti Kartini Enche Ab Rahim
    ;
    Mohd Riduan Jamalludin
    ;
    Hoo Peng Yong
    This study explores the synthesis of Superparamagnetic Iron Oxide Nanoparticles (SPIONs) by leveraging natural iron sand and steel wool as primary raw materials within the co-precipitation method, which reduces the cost of production compared to the commercial counterparts. The research systematically investigated the influence of the diethylamine percentage, annealing time and annealing temperature on the SPIONs’ synthesis from natural iron sand by the co-precipitation method. Fe3O4 with varying crystallite sizes, ranging from 11.5 to 14.7 nm, were confirmed. SEM highlighted the nanoparticle agglomeration, a concern addressable through surface modification techniques, as further emphasized by TEM, which confirmed the nano-scale dimensions. Magnetic saturation values were confirmed by VSM, ranging from 37 to 51 emu/g. These values established the superparamagnetic behavior, rendering the nanoparticles suitable for versatile applications. The study identifies a potential threshold effect of the diethylamine concentration on the magnetic saturation and suggests an optimum annealing temperature for energy efficiency. This research contributes valuable insights into harnessing natural iron sand for SPION synthesis, advancing cost-effective and sustainable approaches in nanomaterial development, while emphasizing the importance of parameter customization for producing high-quality SPIONs.
  • Publication
    Facial synthesis of colloidal stable magnetic nanoparticles coated with high hydrophilic negative charged poly(4‐styrenesulfonic acid co‐maleic acid) sodium for water remediation
    (Wiley, 2023)
    Lim Chuan Chuan
    ;
    Ng Qi Hwa
    ;
    Hoo Peng Yong
    ;
    Siti Kartini Enche Ab Rahim
    ;
    Mohd Riduan Jamalludin
    ;
    Amira Mohd Nasib
    ;
    Sigit Tri Wicaksono
    ;
    Azzah Dyah Pramata
    ;
    Siti Zullaikah
    The enhancement of the colloidal stability of magnetite nanoparticles (MNPs) for environmental‐related fields has greatly attracted researchers' attention. This study used a high hydrophilic negatively charged polyelectrolyte, poly(4‐styrenesulfonic acid co‐maleic acid) sodium (PSAAS), to enhance the colloidal stability of MNPs. Coating of the naked MNPs with PSAAS polyelectrolyte is a simple and rapid method to obtain colloidally stable MNPs while sustaining the chemical reactivity of MNPs in water purification. The prepared PSAAS‐coated MNPs were characterized by scanning electron microscope, energy dispersive X‐ray, Fourier transform infrared, zeta potential analysis, transmission electron microscope and X‐ray diffraction. Moreover, the colloidal stability and adsorption performance tests of these naked MNPs and PSAAS‐coated MNPs (with different concentrations of PSAAS coated) were investigated and compared. PSAAS‐coated MNPs with 0.001 g/ml PSAAS coating possessed the best colloidal stability and the highest methylene blue (MB) dye removal efficiency (94.53 ± 0.69%). The adsorption isotherm and kinetic studies for the adsorption of MB onto PSAAS‐coated MNPs were well‐described by the Langmuir model and pseudo‐second‐order kinetic model. These magnetic adsorbents, with high separation efficiency, simple and low production cost and recyclable property, are promising as practicable adsorbents in water treatment.
  • Publication
    Facile synthesis of hybrid-polyoxometalates nanocomposite for degradation of cationic and anionic dyes in water treatment
    (Academic Enhancement Department, King Mongkut's University of Technology North Bangkok, 2025-03)
    Wei Wei Leow
    ;
    Alvin Duke
    ;
    Siti Kartini Enche Ab Rahim
    ;
    Ng Qi Hwa
    ;
    Norazharuddin Shah Abdullah
    ;
    Hoo Peng Yong
    ;
    Amira Mohd Nasib
    ;
    Muhamad Qauyum Zawawi Ahamad Suffin
    Photocatalysis emerges as a promising method for treating organic dye contaminated wastewater. This process involves the use of photocatalysts through light activation, typically semiconductors such as titanium dioxide (TiO2) or polyoxometalates (POM) to generate reactive species capable of degrading organic pollutants. Several factors influence the photodegradation of ionic and cationic dyes including chemical properties, reaction mechanism and degradation efficiency. This work evaluated photodegradation performance of methyl orange (MO) and malachite green (MG) dyes using hybrid-polyoxometalate (HPOM) photocatalyst. Fourier Transform Infrared Spectroscopy (FTIR) identified the characteristic band at 3463.66 cm–1 (O-H) and 997.74 cm–1 (W-O). Scanning Electron Microscopy (SEM) revealed the presence of rod-like and granular structures in HPOM, representing silver acetate and sodium tungstate. X-ray diffraction (XRD) confirmed characteristic peak of Keggin structure, revealing high crystallinity of HPOM. UV-assisted photodegradation was evaluated on different parameters (initial dye concentration, photocatalyst dosage and pH), highlighting HPOM’s better affinity for degrading cationic dye. The optimum photodegradation conditions for MG and MO dyes were 20 ppm dye concentration, 100 mg photocatalyst dosage, and pH 7 and 8, respectively. The kinetic data was fitted with the Langmuir Hinshelwood kinetic model, indicating pseudo-first-order kinetics. HPOM exhibited a higher rate constant, k for MG (k = 0.0068 min–1) than MO (k = 0.0029 min–1).
      1  1