Enhanced Production of Levulinic Acid from Oil Palm Empty Fruit Bunch
2024-01-01,
Chuaboon L.,
Saengsen C.,
Sookbampen O.,
Yang E.,
Hafiza Shukor,
Chisti Y.,
Rongwong W.
Levulinic acid (LA) was produced from oil palm empty fruit bunch (OPEFB) pretreated in two different ways: (1) a two-step treatment with peracetic acid (PA) and alkaline peroxide (AP); and (2) an ammonia soak pretreatment. The pretreated material was subjected to acid hydrolysis (5% w/v sulfuric acid, 125 °C to 175 °C, 120 min) to produce LA. Compared to the ammonia treatment, the two-step PA–AP pretreatment was better in removing lignin from OPEFB, and resulted in a higher LA yield based on the mass of the pretreated OPEFB. On a mass basis, the LA yield was 31.1% on pretreated OPEFB, that had been pretreated using the PA–AP process, but only 16.7% from the biomass treated using the ammonia process. The kinetics of acid-catalyzed production of LA from the pretreated OPEFB were investigated to develop a mathematical model for predicting the conversion of cellulose to the intermediates (glucose, 5-hydroxymethylfurfural), and the final product, LA. The hydrolysis of cellulose to glucose was found to be the rate-controlling step in acid-catalyzed production of LA, confirming the importance of the delignification pretreatment in making cellulose more amenable to hydrolysis. During the two-stage acid hydrolysis, the reaction at 175 °C for 15 min in the first stage, followed by 125 °C for 105 min in the second stage, resulted in LA molar yield (based on cellulose) of ∼40%. This was comparable to the yield obtained if both steps were performed at 150 °C for a total of 120 min.