Fauziah Che Mat
Thumbnail Image
Preferred name
Fauziah Che Mat
Official Name
Fauziah, Mat
Alternative Name
Mat, Fauziah
Mat, Fauziah
Main Affiliation
Scopus Author ID
38362054200
Researcher ID
ITQ-2640-2023

Research Output

Filters

9 1
21
Reset filters

Settings
Now showing 1 - 10 of 21
Thumbnail Image
Publication

Assessment of functional and dysfunctional on implant stability measurement for quality of life

2017-02-01 , Norshahrizan Nordin , Mohd. Mustafa Al Bakri Abdullah , Fauziah Che Mat , Muhammad Abdullah. , Razli Che Razak , Abdul Hamid Adom

This study was conducted to investigate the effect of an implant wearer comprising among orthopedic patients as well as the use of implant dentistry in Northern Malaysia. A total of 100 questionnaires were distributed and 70 questionnaires can be used to record, analyze and test hypotheses. Data for all variables were collected through a questionnaire administered alone and analyzed by using SmartPLS V3. A total of four (4) hypotheses have been formulated and the results show that the hypothesis is supported. The results show that: (1) limit the functionality and quality of life was significantly (0.904) in connection with the implant wearer, (2) physical pain was significantly (0.845) relating to the quality of life, (3) physical discomfort was significantly (0.792) in connection with quality of life, and also (4) social discomfort is significant as well (0.809). This finding suggests that there are positive effects on the implant wearer who through life routine. The results of the study may also serve as a basis for reliable decisions related to quality of life and for the implementation of awareness campaign that increase how the need for humanity in the field of quality involvement.

View
Thumbnail Image
Publication

Energy absorption and failure behavior of Al/CFRP/GFRP hybrid tubes under quasi-static axial loading

2023-07-01 , Fauziah Che Mat , Mohd Ridzuan Mohd Jamir , Masniezam Ahmad , Mohd Shukry Abdul Majid , Khairul Azwan Ismail

Fiber metal laminate (FML) is gaining increased interest among researchers in designing thin-walled tubes as an efficient energy absorber. The combination of aluminum tube and fiber-reinforced polymer (FRP) as an FML hybrid tube has successfully demonstrated enhanced crashworthiness performance of structures. Previous studies reported FML hybrid tubes employing a single type of FRP composite material as the laminate material. Investigations on the effect of stacking sequences of multiple types of FRP composite as laminate materials are limited and mostly focused on sandwich structures. This study aims to investigate the effect of reinforcement material as a laminate layer and stacking sequences on the crashworthiness characteristics of aluminum-FRP hybrid tubes under quasi-static axial compression loading. The crashworthiness characteristics and the failure behavior of aluminum monolithic tube, aluminum-single FRP material, and aluminum-multi FRP material hybrid tubes are tested and compared. Glass FRP (GFRP) demonstrates great potential as a laminate material for aluminum tube compared with carbon FRP (CFRP). Aluminum-GFRP and aluminum-GFRP-CFRP hybrid tubes exhibit a 26.4 % and 66.9 % increase in energy absorbed, respectively, compared with the monolithic aluminum tube. The specific energy absorption and crushing force efficiency of the aluminum-GFRP-CFRP hybrid tube show minimal reductions of 4.9 % and 6.2 %, respectively. GFRP is the better choice of laminate material for aluminum tubes compared with CFRP. Multiple FRP laminates show a larger crashworthiness enhancement of FRP hybrid tubes in achieving better crashworthiness performance of the energy absorber. These findings imply that the selection and stacking sequences of laminate material are vital in tailoring the performance of the hybrid tubes toward efficient energy absorbers.

View
No Thumbnail Available
Publication

Energy Absorption Characteristics of Thin-Walled Tubes Filled with Rice Husk and Kenaf Fibers

2024-12-02 , Masniezam Ahmad , Khairul Azwan Ismail , Fauziah Che Mat , Mohd. Hazwan Mohd. Hanid , Ahmad Azraai Abd Aziz

This study investigates the energy absorption characteristics of thin-walled tubes filled with rice husk and kenaf fibers when compressed under axial compression. The aim of this study is to evaluate the crashworthiness parameters such as energy absorption (EA), initial peak load (IPL), crush force efficiency (CFE) and specific energy absorption (SEA). Experimental results show that tubes filled with rice husk and kenaf exhibit significant improvements in overall energy absorption compared to empty tubes. However, while both fillers enhanced EA, the SEA values were lower than predicted. Thus, it is suggested that further optimization, such as adjusting filler density or exploring hybrid filler combinations, could improve crashworthiness. This study highlights the potential for rice husk and kenaf fibers as sustainable filler options for lightweight, impact-resistant designs in automotive, aerospace, and other engineering applications, with opportunities for improvement in future research.

View
Thumbnail Image
Publication

Finite element analysis of proximal femur in sideways fall under quasi-static loading

2023-07-01 , Subramaniam D. , Fauziah Che Mat , Mohd Shukry Abdul Majid , Khairul Salleh Basaruddin

Many researchers have investigated femur fractures using 3D models created with finite element (FE) software; however, these models need validation. Cadavers are used in experiments to validate the FE model. Nevertheless, there are several restrictions and obstacles to experimenting on the cadaver femur bone. The aim of this study was to investigate the effect of loading direction on the stress distribution and fracture risk of a proximal femur bone under quasi-static loading in a sideways fall condition. A validated 3D FE model of the proximal femur was developed by employing the results obtained from a quasi-static experimental test. Instead of cadaver, 3D-printed proximal femur bone was used. Various fall loading configurations were used to simulate a sideways fall with inclination angles from 0° to 20° and rotational angles from −15° to 15°. The highest von Mises stress is due to sideways falls distributed in the femur neck region. This study provides new information on FE model construction and medical FE analysis.

View
No Thumbnail Available
Publication

Finite element analysis of proximal femur under static loading during sideway fall

2023 , Wong Kah Poh , Fauziah Che Mat , Fauzan Djamaluddin , Masniezam Ahmad , Nur Saifullah Kamaruddin , Ruslizam Daud , Ishak Ibrahim

A femoral fracture happens when the femur gains a very high stress concentration during fall and may results in femur fracture. In fact, most of fall-related cases occur in sideways fall. Bone fracture leads to life quality impairment and even life threatening. In this study, the effect of quasi-static loading on the femur bone during sideway fall is investigated by employing Finite Element (FE) software, ANSYS. The FE model is developed and simulated in the different fall conditions; inclination angle of 10° and rotation angle from -20° to 30°. The capacity of the bone is evaluated in terms of von Mises stress and deformation. The highest stress concentration is found at femoral neck region. 30° rotation angle with 10° inclination angle is observed as the critical loading direction at which the femoral neck may results in fracture. The understanding of the effect of loading magnitude and direction on the femoral bone capacity obtained herewith is useful in assisting the medical practitioner to provide better treatment and reduce repeated treatment cases.

View
Thumbnail Image
Publication

Pre- and Post-operative Assessment of Bone with Osteogenesis Imperfecta using Finite Element Analysis: A Review

2024-02-01 , Wanna Soh Bua Chai , Khairul Salleh Basaruddin , Mohd Hanafi Mat Som , Fauziah Che Mat , Muhamad Khairul Ali Hassan

Applications of finite element analysis (FEA) to demonstrate the pre-and post-operative conditions of the brittle bone-related disease known as osteogenesis imperfecta (OI) has been widely used in the past and at present. The method used to reconstruct the bone model that resemble the OI bone geometry plays an important aspect to accurately represent the bone condition to provide more alternative ways to evaluate surgical intervention options. Other factors such as material properties and boundary conditions also reflect the results of the analysis. Therefore, the aim of this review paper is to analyse the approaches of previous studies in terms of model geometry construction, selection of materials properties and boundary conditions to enable a deeper understanding and evaluation of bone fractures in OI patients. The biomechanical design of the intramedullary (IM) rods used in post-operative surgery and the interface between IM rods and bone fragments are also discussed in this review paper.

View
Thumbnail Image
Publication

Energy release rate analysis on the interface cracks of enamel-cement-bracket fracture using virtual crack closure technique

2017-10-29 , Syafiq Farhan Samshuri , Ruslizam Daud , Mohd Afendi Rojan , Fauziah Che Mat , Khairul Salleh Basaruddin , Rozita Hassan

This paper presents the energy method to evaluate fracture behavior of enamel-cement-bracket system based on cement thickness. Finite element (FE) model of enamel-cement-bracket was constructed by using ANSYS Parametric Design Language (APDL). Three different thickness were used in this study, 0.05, 0.2, and 0.271 mm which assigned as thin, medium and thick for both enamel-cement and cement bracket interface cracks. Virtual crack closure technique (VCCT) was implemented as a simulation method to calculated energy release rate (ERR). Simulation results were obtained for each thickness are discussed by using Griffith's energy balance approach. ERR for thin thickness are found to be the lowest compared to medium and thick. Peak value of ERR also showed a significant different between medium and thick thickness. Therefore, weakest bonding occurred at low cement thickness because less load required to produce enough energy to detach the bracket. For medium and thick thickness, both increased rapidly in energy value at about the mid-point of the enamel-cement interface. This behavior occurred because of the increasing in mechanical and surface energy when the cracks are increasing. However, result for thick thickness are higher at mid-point compared to thin thickness. In conclusion, fracture behavior of enamel cracking process for medium most likely the safest to avoid enamel fracture and withstand bracket debonding.

View
No Thumbnail Available
Publication

Validation of foam filled tube model and optimization result using Weibull distribution

2020 , Fauzan Djamaluddin , Ahmad, Z. A. , Fauziah Che Mat

Passenger safety and low fuel consumption rate are the most important factors that need to be considered when designing modern transportations. This study validates the crash behavior and optimum values of foam-filled structures under the dynamic oblique impact using the Weibull distribution. The optimization method aimed to absorb maximum energy with minimum peak crushing force. Furthermore, the metamodel and optimization techniques such as RBF and NSGA-II were used to ensure accurate validation of the Weibull distribution method. The result showed that the finite element model is comparable to the experimental data in the reference, while the metamodel method, which is directly verified, affects optimization results. The Weibull distribution method shows that the optimum value and the simulation have good accuracy or R2 > 0.85.

View
Thumbnail Image
Publication

Effect of Water Absorption on Graphene Nanoplatelet and Multiwalled Carbon Nanotubes-impregnated Glass Fibre-Reinforced Epoxy Composites

2023-07-01 , Ahmad M.A.A. , Mohd Ridzuan Mohd Jamir , Mohd Shukry Abdul Majid , Sapuan S.M. , Shahriman Abu Bakar , Fauziah Che Mat

In this study, the effect of water uptake on graphene nanoplatelets (GNP) and multiwalled carbon nanotube (MWCNT)-impregnated glass fibre-reinforced epoxy composites was examined. The composite was manufactured using a hand lay-up and vacuum bagging technique. The nanofiller was mixed with epoxy using a mechanical stirrer, high-shear mixer, and ultrasonic probe machine. In situ electromechanical testing was performed on the specimens. The study found that the weight content and type of nanofiller impact the composites' water uptake and mechanical properties. The water uptake of GNP–glass, MWCNT–glass, and GNP–MWCNT–glass hybrid composites decrease with the addition of different nanofiller contents. Adding a 1.5 GNP–MWCNT hybrid mixture increased the composite's tensile and flexural strengths to 269.3 and 294.4 MPa, respectively. The GNP–MWCNT–glass hybrid composite shows a positive synergy effect on the enhancement of water-ageing with self-sensing ability, while the GNP–glass, MWCNT–glass composites show a less positive effect on water ageing sensing behaviour. The nanofillers dispersion and fracture surface morphological observations were disclosed using a field emission scanning electron microscope. The results established that the GNP–MWCNT–glass hybrid exhibits good potential for in situ damage monitoring of composites and can support their development and application as a smart material.

View
Thumbnail Image
Publication

Modification of the design of circular thin-walled tubes to enhance dynamic energy absorption characteristics: experimental and finite element analysis

2020 , Masniezam Ahmad , Khairul Azwan Ismail , Mohd. Hazwan Mohd. Hanid , Fauziah Che Mat , A M Roslan

A thin-walled tube is an energy absorber device that functions to dissipate kinetic energy into another form of energy during impact. The design of thin-walled tubes is a significant factor which affects to the energy absorption characteristics. This paper provides a comparative study between the original thin-walled tube designs and several modified tube designs that have been proposed. The main objective is to improve the energy absorption characteristics, such as energy absorption capacity, initial peak load, specific energy absorption (SEA) and crush force efficiency (CFE). Throughout this research, aluminium alloy AA6061-T6 has been used as the material for all tubes. For comparison, all of the tubes are developed with a circular shape with the same diameter, thickness and length. In addition, they are also impacted at the same kinetic energy under dynamic axial loading. Validated LS-DYNA finite element (FE) models have been used to simulate the impact of the thin-walled tubes. Compared to the original tube design, the modified tubes have improved energy absorption characteristics. A conical tube with a flat end cap was identified as the best performing tube among the modified tubes because it had the lowest initial peak load, a moderate energy absorption capacity and an excellent CFE and SEA. The findings from this study can be used as a guidance in designing thin-walled structure.

View