Lim Bee Ying
Thumbnail Image
Preferred name
Lim Bee Ying
Official Name
Lim, Bee Ying
Alternative Name
Lim, B. Y.
Lim, Bee Y.
Main Affiliation
Scopus Author ID
57209532691
Researcher ID
DVB-1384-2022

Research Output

Filters

3
Reset filters

Settings
Now showing 1 - 3 of 3
No Thumbnail Available
Publication

Microwave welding with SiCNW/PMMA nanocomposite thin films: enhanced joint strength and performance

2025-01 , Phey Yee Foong , Voon Chun Hong , Lim Bee Ying , Foo Wah Low , Teh Pei Leng , Nor Azizah Parmin , Subash Chandra Bose Gopinath , Veeradasan Perumal , Yeoh Cheow Keat , Nor Azura Abdul Rahim

Most previously reported susceptors for microwave welding are in powder form. In this study, a thin-film susceptor was employed due to its uniform heating rate and ease of handling. Silicon carbide nanowhisker (SiCNW) were incorporated into a poly(methyl methacrylate) (PMMA) matrix to create a nanocomposite thin film, which served as the susceptor. The microwave welding process involved three straightforward steps: fabrication of the PMMA/SiCNW nanocomposite thin film, application of the nanocomposite film to the target area, and subsequent microwave heating. Upon cooling, a robust microwave-welded joint was formed. The mechanical properties and microstructure of the welded joints were characterized using single-lap shear tests, three-point bending tests, and scanning electron microscopy. Results demonstrated that the shear strength and elastic modulus of the welded joints were optimized with increased heating time and SiCNW filler loading. This optimization is attributed to the formation of a SiCNW-filled polypropylene (PP) nanocomposite layer of increasing thickness at the welded joint interface. However, the incorporation of SiCNW also constrained the mobility of the PP chains, reducing the joint’s flexibility. Furthermore, the welded joint formed with the PMMA/SiCNW nanocomposite thin-film susceptor exhibited an 18.82% improvement in shear strength compared to joints formed with a powdered SiCNW susceptor. This study not only demonstrates the potential of PMMA/SiCNW nanocomposite thin films as efficient susceptors for microwave welding but also paves the way for developing high-performance polymer-based composite joints with improved mechanical properties for applications in the automotive, aerospace, and construction industries.

View
Thumbnail Image
Publication

Dielectric properties and microwave absorbing properties of silicon carbide nanoparticles and silicon carbide nanowhiskers

2023-04 , Phey Yee Foong , Voon Chun Hong , Lim Bee Ying , Teh Pei Leng , Mohd Afendi Rojan , Subash Chandra Bose Gopinath , Nor Azizah Parmin , Mohd Khairuddin Md Arshad , Yeng Seng Lee , Ruslinda A. Rahim , Uda Hashim

Silicon carbide (SiC) is well known for their outstanding microwave absorbing properties. SiC nanomaterials (SiCNMs) are expected to have better microwave absorption performance due to their high specific surface area. To date, no study was reported to compare the dielectric properties and microwave absorbing properties of different type of SiCNMs. Therefore, the objective of this paper is to compare the dielectric properties and microwave absorption properties of different types of SiCNMs. In this paper, SiC nanoparticles (SiCNPs) and SiC nanowhiskers (SiCNWs) were characterised using SEM and XRD. In addition, their dielectric properties and microwave absorbing properties were measured using network analyser and transmission line theory. It was found that SiCNWs achieved higher dielectric constant and loss factor which are and εr’ =17.94 and εr″ = 2.64 compared to SiCNPs that only achieved εr’ = 2.83 and εr″ = 0.71. For microwave absorbing properties, SiCNWs and SiCNPs attained minimum reflection loss of -10.41 dB and -6.83 dB at 5.68 GHz and 17.68 GHz, respectively. The minimum reflection loss of SiCNPs and SiCNWs obtained in this study is much lower than the nanometer-SiC reported previously. These results suggested that SiCNWs can be an ideal candidate of microwave susceptors for various microwave applications

View
Thumbnail Image
Publication

Fabrication of polymethyl methacrylate composite films with silanized SiC nanoparticles

2025-01 , Mohamad Azrol Azmi , Lim Bee Ying , Voon Chun Hong , Phey Yee Foong , Teh Pei Leng

The properties of polymeric composites have often been altered with the incorporation of fillers. In this study, the poly(methyl methacrylate) (PMMA) was filled with silicon carbide nano-particles (SiC). The PMMA/SiC composite films were prepared through solution casting by using acetone as solvent. The different loading of SiC ranging from 0.25 wt% to 1.00 wt% were incorporated into the PMMA matrix. The effect of SiC loading and silane coupling agent on PMMA/SiC composite films in terms of mechanical, physical, and morphological properties was investigated. It was found that the increasing SiC loading and the silane treatment had increased the tensile strength and Young’s modulus but reduced the elongation at the break of PMMA/SiC composite films. At 0.75 wt% of silanized SiC, the tensile strength of the composite films was found to increase by 25 % from 30 to 37.5 MPa as compared to the virgin PMMA. Besides, the hardness of composite films was also increased with SiC loading and silane treatment. The presence of 1.00 wt% silanized SiC had increased 21.7% the hardness of the virgin PMMA, resulting in the increase of Shore A value from 69 to 84. By using silane treatment, better filler-matrix interaction was established as smoother fracture surfaces were observed through SEM micrographs and higher d-spacing was found in X-ray diffraction (XRD) patterns. The PMMA/SiC composite films prepared were suitable to be used in sporting goods, additive manufacturing, and environmental and protective coatings.

View