Zarina Yahya
Thumbnail Image
Preferred name
Zarina Yahya
Official Name
Zarina, Yahya
Alternative Name
Yahya, Zarina
Zarina, Y.
Zarina, Yahya
Main Affiliation
Scopus Author ID
51162069600
Researcher ID
DXZ-6436-2022

Research Output

Filters

46
Reset filters

Settings
Now showing 1 - 10 of 46
  • Publication
    A Review on the Concrete Durability Exposed to Different Wet-Dry Cycles Conditions
    ( 2024-04-19)
    Zarina Yahya
    ;
    Rafiza Abd Razak
    ;
    Khairunnisa Muhamad
    Concrete structure is prone to corrosion and weathering when built near marine environment. The greater damage on the concrete can be observed when it involves wet-dry action such as tidal waves combine with the existence of aggressive ions such as sulphate and chloride in seawater. The objective of this study is to review on the mechanism of sulphate, chloride attack toward concrete, parameters that influence the wet-dry action and identify the overview of research trends. The mechanism of sulphate and chloride attack during wet-dry action had reciprocal inhibiting effect on concrete and the penetration level for each ion also vary. The physical and mechanical damage of concrete exposed to wet-dry action also influence by wet-dry ratio, number of cycles and temperature during drying process. The main compound detected during exposure period are Friedel salt, ettringite, mirabilite and thenardite which can cause concrete delamination and spalling.
  • Publication
    Rice husk (RH) as additive in fly ash based geopolymer mortar
    ( 2017-09-26)
    Zarina Yahya
    ;
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Mohd Azrin Adzhar Rahim
    ;
    Armia Nasri
    In recent year, the Ordinary Portland Cement (OPC) concrete is vastly used as main binder in construction industry which lead to depletion of natural resources in order to manufacture large amount of OPC. Nevertheless, with the introduction of geopolymer as an alternative binder which is more environmental friendly due to less emission of carbon dioxide (CO2) and utilized waste materials can overcome the problems. Rice husk (RH) is an agricultural residue which can be found easily in large quantity due to production of paddy in Malaysia and it's usually disposed in landfill. This paper investigated the effect of rice husk (RH) content on the strength development of fly ash based geopolymer mortar. The fly ash is replaced with RH by 0%, 5%, 10%, 15% and 20% where the sodium silicate and sodium hydroxide was used as alkaline activator. A total of 45 cubes were casted and their compressive strength, density and water absorption were evaluated at 1, 3, and 7 days. The result showed compressive strength decreased when the percentage of RH increased. At 5% replacement of RH, the maximum strength of 17.1MPa was recorded at day 7. The geopolymer has lowest rate of water absorption (1.69%) at 20% replacement of RH. The density of the sample can be classified as lightweight geopolymer concrete.
  • Publication
    Durability of geopolymer lightweight concrete infilled LECA in seawater exposure
    ( 2017-11-23)
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Zarina Yahya
    ;
    Hamid M.
    This paper describes a development of lightweight concrete using lightweight expanded clay aggregate (LECA) in fly ash (FA) based geopolymer immersed in seawater. The objective of this research is to compare the performance of geopolymer concrete (GPC) with ordinary Portland cement (OPC) concrete infilled lightweight expanded clay aggregate (LECA) in seawater exposure. Geopolymer concrete is produced by using alkaline activator to activate the raw material, FA. The highest compressive strength of this study is 42.0 MPa at 28 days and 49.8 MPa at 60 days. The density for this concrete is in the range of 1580 kg/m3 to 1660 kg/m3. The result for water absorption is in the range of 6.82% to 14.72%. However, the test results of weight loss is in the range between 0.30% to 0.43%.
  • Publication
    The ProPerTies of Ground GranulaTed BlasT furnace slaG liGhTweiGhT aGGreGaTe (Gla) aT Various Molar raTio and iTs aPPlicaTion in concreTe
    ( 2023-01-01)
    Rafiza Abd Razak
    ;
    Hassan M.A.
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Zarina Yahya
    ;
    Ariffin M.A.M.
    ;
    Ahmad Faizal Mansor
    ;
    Hao D.L.C.
    The effects of supplementary cementitious materials (SCM) on the characteristics and internal structure of synthetic aggregate made from ground granulated blast furnace slag are investigated in this study (GGBS). Due to its high pozzolanic activity, GGBS was shown to be superior to other SCM materials, enhancing both the strength and durability of synthetic aggregate. Because sintering uses a lot of energy and generates a lot of pollutants, using a cold-bonded approach to make low density lightweight aggregates is particularly significant from an economic and environmental standpoint. Thus, the utilisation of ground granulated blast furnace slag (GGBS) as a substitute material in the production of green artificial lightweight aggregate (GLA) using the cold bonding method was discussed in this work. Admixtures of ADVA Cast 203 and Hydrogen Peroxide were utilised to improve the quality of GLA at various molar ratios. The freshly extracted GLA was then evaluated for specific gravity, water absorption, aggregate impact, and aggregate crushing in order to determine the optimal proportion blend. As a result, the overall findings offer great application potential in the development of concrete (GCLA). It has been determined that aggregates with a toughness of 14.6% and a hardness of 15.9% are robust. The compressive strength test found that the GCLA has a high strength lightweight concrete of 37.19 MPa and a density of 1845.74 kg/m3. The porous features developed inside the internal structure of GLA have led to GCLA’s less weight compared to conventional concrete.
      2
  • Publication
    Behavior of alkali-activated fly ash through underwater placement
    ( 2021-11-01)
    Zarina Yahya
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Li Long-Yuan
    ;
    Nergis D.D.B.
    ;
    Muhammad Aiman Asyraf Zainal Hakimi
    ;
    Sandu A.V.
    ;
    Vizureanu P.
    ;
    Rafiza Abd Razak
    Underwater concrete is a cohesive self-consolidated concrete used for concreting underwater structures such as bridge piers. Conventional concrete used anti-washout admixture (AWA) to form a high-viscosity underwater concrete to minimise the dispersion of concrete material into the surrounding water. The reduction of quality for conventional concrete is mainly due to the washing out of cement and fine particles upon casting in the water. This research focused on the detailed investigations into the setting time, washout effect, compressive strength, and chemical composition analysis of alkali-activated fly ash (AAFA) paste through underwater placement in seawater and freshwater. Class C fly ash as source materials, sodium silicate, and sodium hydroxide solution as alkaline activator were used for this study. Specimens produced through underwater placement in seawater showed impressive performance with strength 71.10 MPa on 28 days. According to the Standard of the Japan Society of Civil Engineers (JSCE), the strength of specimens for underwater placement must not be lower than 80% of the specimen’s strength prepared in dry conditions. As result, the AAFA specimens only showed 12.11% reduction in strength compared to the specimen prepared in dry conditions, thus proving that AAFA paste has high potential to be applied in seawater and freshwater applications.
      2
  • Publication
    Mechanical performance, microstructure, and porosity evolution of fly ash geopolymer after ten years of curing age
    ( 2023)
    Ikmal Hakem A. Aziz
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Rafiza Abd Razak
    ;
    Zarina Yahya
    ;
    Mohd Arif Anuar Mohd Salleh
    ;
    Jitrin Chaiprapa
    ;
    Catleya Rojviriya
    ;
    Petrica Vizureanu
    ;
    Andrei Victor Sandu
    ;
    Muhammad Faheem Mohd. Tahir
    ;
    Alida Abdullah
    ;
    Liyana Jamaludin
    This paper elucidates the mechanical performance, microstructure, and porosity evolution of fly ash geopolymer after 10 years of curing age. Given their wide range of applications, understanding the microstructure of geopolymers is critical for their long-term use. The outcome of fly ash geopolymer on mechanical performance and microstructural characteristics was compared between 28 days of curing (FA28D) and after 10 years of curing age (FA10Y) at similar mixing designs. The results of this work reveal that the FA10Y has a beneficial effect on strength development and denser microstructure compared to FA28D. The total porosity of FA10Y was also lower than FA28D due to the anorthite formation resulting in the compacted matrix. After 10 years of curing age, the 3D pore distribution showed a considerable decrease in the range of 5–30 µm with the formation of isolated and intergranular holes.
      20  1
  • Publication
    Surface resistivity and ultrasonic pulse velocity evaluation of reinforced opc concrete and reinforced geopolymer concrete in marine environment
    ( 2021-01-01)
    Mohd Badrul Hisyam Ab Manaf
    ;
    Zarina Yahya
    ;
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Ariffin N.F.
    ;
    Muhammad Munsif Ahmad
    ;
    Chong Y.C.
    The concrete structures that are built along the seaside often suffer from reduced service life due to inadequate durability against deterioration. This research reports the findings of concrete resistivity and quality using two Non-Destructive Testing (NDT) measures applied to Reinforced Geopolymer and Ordinary Portland Cement (OPC) concrete in the marine environment. In addition, the relationship between Reinforced Geopolymer and Reinforced OPC concrete was statistically discussed in-terms of strength and direction. The testing was carried out using a Proceeq Resipod Wenner 4-probe to measure Surface Resistivity (SR) and Ultrasonic Pulse Velocity (UPV), respectively. The testings were carried out on beam shaped samples of OPC and Geopolymer concrete that were immersed in seawater over a period of 90 days with similar curing condition. It was found from the present investigation that the maximum SR and maximum UPV values acquired for both the Reinforced OPC and Reinforced Geopolymer concrete are 2.73 kΩcm and 2.07 kΩcm, as well as 4.18 km/s and 4.05 km/s, respectively. It is apparent from the study that both concrete is comparable in terms of quality and surface resistivity.
      1
  • Publication
    Optimization of NaOH molarity, LUSI mud/alkaline activator, and Na₂SiO₃/NaOH ratio to produce lightweight aggregate-based geopolymer
    ( 2015)
    Rafiza Abd Razak
    ;
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Djwantoro Hardjito
    ;
    Kamarudin Hussin
    ;
    Khairul Azwan Ismail
    ;
    Zarina Yahya
    This paper presents the mechanical function and characterization of an artificial lightweight geopolymer aggregate (ALGA) using LUSI (Sidoarjo mud) and alkaline activator as source materials. LUSI stands for LU-Lumpur and SI-Sidoarjo, meaning mud from Sidoarjo which erupted near the Banjarpanji-1 exploration well in Sidoarjo, East Java, Indonesia on 27 May 2006. The effect of NaOH molarity, LUSI mud/Alkaline activator (LM/AA) ratio, and Na₂SiO₃/NaOH ratio to the ALGA are investigated at a sintering temperature of 950 °C. The results show that the optimum NaOH molarity found in this study is 12 M due to the highest strength (lowest AIV value) of 15.79% with lower water absorption and specific gravity. The optimum LUSI mud/Alkaline activator (LM/AA) ratio of 1.7 and the Na2SiO3/NaOH ratio of 0.4 gives the highest strength with AIV value of 15.42% with specific gravity of 1.10 g/cm3 and water absorption of 4.7%. The major synthesized crystalline phases were identified as sodalite, quartz and albite. Scanning Electron Microscope (SEM) image showed more complete geopolymer matrix which contributes to highest strength of ALGA produced.
      1  21
  • Publication
    Fly ash-based geopolymer lightweight concrete using foaming agent
    ( 2012)
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Kamarudin Hussin
    ;
    Mohamed Bnhussain
    ;
    Khairul Nizar Ismail
    ;
    Zarina Yahya
    ;
    Rafiza Abdul Razak
    In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The reactives were mixed to produce a homogeneous mixture, which was placed into a 50 mm mold and cured at two different curing temperatures (60 °C and room temperature), for 24 hours. After the curing process, the strengths of the samples were tested on days 1, 7, and 28. The water absorption, porosity, chemical composition, microstructure, XRD and FTIR analyses were studied. The results showed that the sample which was cured at 60 °C (LW2) produced the maximum compressive strength for all tests, (11.03 MPa, 17.59 MPa, and 18.19 MPa) for days 1, 7, and 28, respectively. Also, the water absorption and porosity of LW2 were reduced by 6.78% and 1.22% after 28 days, respectively. The SEM showed that the LW2 sample had a denser matrix than LW1. This was because LW2 was heat cured, which caused the geopolymerization rate to increase, producing a denser matrix. However for LW1, microcracks were present on the surface, which reduced the compressive strength and increased water absorption and porosity.
      3  36
  • Publication
    Asas Geopolimer Teori & Amali
    (Penerbit UniMAP, 2013)
    Mohd. Mustafa Al Bakri Abdullah
    ;
    Rafiza Abd Razak
    ;
    Zarina Yahya
    ;
    Kamarudin Hussin
    ;
    Liew Yun Ming
    ;
    Heah Cheng Yong
    ;
    Mohd Izzat, Ahmad
    Buku Asas Geopolimer: Teori dan Amali ialah sebuah buku yang membincangkan beberapa perkara asas yang penting mengenai geopolimer. Ia meliputi aspek-aspek seperti; Sejarah geopolimer Pengenalan kepada geopolimer Perbandingan konkrit geopolimer dengan konkrit biasa Bahan mentah dalam geopolimer Tindak balas kimia Kaedah pemprosesan Kualiti konkrit geopolimer Penyelidikan geopolimer masa kini Penulisan buku ini menumpukan kepada teori asas, proses dan pencirian geopolimer yang memberi pengetahuan kepada pembaca mengenai teori dan praktikal berasaskan hasil penyelidikan yang dibuat penyelidik. Tiga perkara utama yang dibincangkan di dalam buku ini ialah bahan mentah (larutan pengaktif alkali), tindak balas kimia yang memainkan peranan dalam proses pengeopolimeran dan pemprosesan geopolimer. Buku Asas Geopolimer: Teori dan Amali ini juga adalah buku pertama yang dihasilkan dalam Bahasa Melayu.
      1  16