Anis Atikah Ahmad
Thumbnail Image
Preferred name
Anis Atikah Ahmad
Official Name
Anis Atikah, Ahmad
Alternative Name
Ahmad, Anis Atikah
Ahmad, Anis A.
Main Affiliation
Scopus Author ID
56900415200
Researcher ID
P-6794-2018

Research Output

Filters

4
4
Reset filters

Settings
Now showing 1 - 4 of 4
Thumbnail Image
Publication

Adsorption of basic green 4 onto gasified Glyricidia sepium woodchip based activated carbon: optimization, characterization, batch and column study

2020 , Anis Atikah Ahmad , Azam Taufik Mohd Din , Nasehir Khan EM Yahaya , Azduwin Khasri , Mohd Azmier Ahmad

The abundance of gasification char residues which contributed to solid waste management problem is one of the major concerns in biomass gasification industry. This study focuses on synthesizing gasified Glyricidia sepium woodchip based activated carbon (GGSWAC) for the removal of basic green 4 (BG4) dye, evaluating the GGSWAC physicochemical properties and assessing the BG4 adsorption performance in batch and fixed-bed column systems. The optimal conditions of GGSWAC synthesis were at radiation power, time, and impregnation ratio (IR) of 616 W, 1 min and 1.93 g/g, respectively. The surface area (SBET) and total pore volume (TPV) of GGSWAC were 633.30 m2/g and 0.34 cm3/g, respectively. The Fritz–Schlünder best fitted to the experimental data at all temperatures in the isothermal studies, indicating a monolayer adsorption. The kinetic study showed that BG4 adsorption followed Avrami kinetic model. Based on thermodynamic parameters, the adsorption of BG4 dye onto GGSWAC was an endothermic and spontaneous process. In continuous operation, the Thomas and Yoon–Nelson models successfully predicted BG4 adsorption onto GGSWAC. The low production cost of 0.54 USD/kg showed that GGSWAC is economically feasible for commercialization.

View
No Thumbnail Available
Publication

Honeycomb-like porous-activated carbon derived from gasification waste for malachite green adsorption: equilibrium, kinetic, thermodynamic and fixed-bed column analysis

2020 , Anis Atikah Ahmad , Mohd Azmier Ahmad , Nasehir Khan E.M. Yahaya , Azam Taufik Mohd Din , Ahmad Radi Wan Yaakub

In this study, the preparation conditions for the gasification waste-based activated carbon (GWAC) were optimized with malachite green (MG) dye removal and GWAC yield as responses. The adsorption equilibrium, kinetic behavior, and thermodynamics properties were also ana-lyzed. The optimum conditions for synthesizing GWAC were found at a radiation power, time, and impregnation ratios of 616 W, 1 min, and 1.06 g g–1, respectively, which resulted in an 89.98% yield of GWAC and 99.01% MG removal. This sample shows the surface area and total pore volume of 351.92 m2 g–1 and 0.22 cm3, respectively. For the isotherm study, the Fritz–Schlünder model fitted the adsorption data very well with an R2 value of 0.9919–0.9932. The results of the kinetic study showed that the MG adsorption followed a pseudo-first-order kinetic model (R2 = 0.9625–0.9871). The film diffusion was found to be the rate-limiting step of MG adsorption. The adsorption of the MG dye onto GWAC was an endothermic and spontaneous process with ΔH of 9.183 kJ mol–1. In continuous mode, Thomas and Yoon–Nelson models successfully predicted the MG adsorption on the GWAC. GWAC demonstrates its commercial feasibility based on a low production cost of 0.23 USD kg–1.

View
No Thumbnail Available
Publication

Effective removal of methylene blue from aqueous solution by adsorption onto gasification char: isotherm, kinetic and thermodynamics studies

2023 , Nurul Najihah Ahmad , Anis Atikah Ahmad , Azduwin Khasri

This study presents the preparation of oil palm empty fruit bunch (OPEFB) activated char from gas-ification plant residues via phosphoric acid chemical treatment for adsorption of methylene blue (MB) in aqueous solution. The Fourier-transform infrared (FTIR), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) analysis were conducted to identify the characteristic of OPEFB. Adsorption experiments were carried out to determine the effects of initial dye concentration 100–300 mg/L, contact time, pH 2–10 and temperature 30°C–60°C. The optimum conditions were achieved at adsorbent dosage, pH, initial dye concentration and temperature of 0.2 g/200 mL, 6, 100 mg/L and 60°C, respectively with 91.44% of MB removal. From isotherm study, the Freundlich isotherm model fitted the adsorption data very well owing to its higher value of correlation factor (R2 = 0.9352), compared to Langmuir model (R2 = 0.8682). The Langmuir maximum monolayer capac-ity, qm was estimated at 167.2 mg/g. The results from the kinetic study showed that the MB adsorp-tion followed a pseudo-second-order kinetic model (R2 = 0.9216–0.9581). The adsorption of the MB dye onto OPEFB activated char was an endothermic and spontaneous process with ΔH°, ΔG° and ΔS° values of 58.379 kJ/mol, –0.70505 kJ/mol and 194.955 J/mol‧K, respectively. The obtained results suggest that the OPEFB char could be a promising candidate as an adsorbent for MB removal.

View
No Thumbnail Available
Publication

Atenolol sequestration using activated carbon derived from gasified Glyricidia sepium

2020 , Anis Atikah Ahmad , Azam Taufik Mohd Din , Nasehir Khan E.M. Yahaya , Jamilah Karim , Mohd Azmier Ahmad

Activated carbon (AC) derived from gasified Glyricidia sepium woodchip (GGSWAC) was prepared using KOH and CO2 activation via microwave radiation technique to remove atenolol (ATN) from aqueous solution. The surface area (SBET) and total pore volume (TPV) of GGSWAC were 483.07 m2/g and 0.255 cm3, respectively. The n-BET model fits well with the isothermal data indicating a multilayer adsorption with the saturation capacity of 121, 143 and 163 mg/g at 30, 45 and 60 °C, respectively. The kinetic study showed that ATN adsorption followed Avrami model equation (R2 ≅ 0.99). Based on the thermodynamic parameters, the adsorption of ATN onto GGSWAC was endothermic (ΔHS = 234.17 kJ/mol) in the first layer of adsorption and exothermic in the subsequent layer (ΔHL = −165.62 kJ/mol). The ATN adsorption was controlled by both diffusion and chemisorption. In continuous operation, the Thomas (R2 = 0.9822) and Yoon–Nelson (R2 = 0.9817) models successfully predicted the ATN adsorption.

View