Shayfull Zamree Abd. Rahim
Thumbnail Image
Preferred name
Shayfull Zamree Abd. Rahim
Official Name
Shayfull Zamree, Abd. Rahim
Alternative Name
Shayfull, Zamree Abd Rahim
Abd Rahim, Shayfull Zamree Abd
Shayfull, Zamree
Abd Rahim, S. Z.
Abd Rahim, Shayfull Zamree Bin
Bin Abd Rahim, S. Zamree
Abd Rahim, S.
zamree bin abd Rahim, Shayfull
Rahim, Shayfull Zamree Abd
Zamree Abd Rahim, Shayfull
Zambree, Shayfull
Rahim, Shayfull Z.B.Abd
Zamree, A. R.Shayfull
Shayfull, Z.
Main Affiliation
Scopus Author ID
54941291700
Researcher ID
I-2840-2019

Research Output
Now showing 1 - 2 of 2
No Thumbnail Available
Publication

Hydroxyapatite incorporated metakaolin/sludge based geopolymer adsorbent for copper ions and ciprofloxacin removal : Synthesis, characterization and mechanisms

2024 , Pilomeena Arokiasamy , Mohd. Mustafa Al Bakri Abdullah , Shayfull Zamree Abd. Rahim , Andrei Victor Sandu , Anna Fedrigo , Ratna Ediati , Shafiq Ishak , Noor Haida Mohd Kaus

The efficacy of copper Cu(II) adsorption is significantly affected by the presence of antibiotics, such as ciprofloxacin (CIP). Therefore, researchers are highly interested in conducting extensive investigations on the simultaneous adsorption of Cu(II) and CIP. However, most of the adsorbents exhibited low adsorption capacity of CIP with increasing Cu(II) concentration due to the competition for adsorption sites. Hence, the integration of various adsorbents into a single composite could be an effective way to increase the adsorption sites. Thus, this study aims to incorporate hydroxyapatite (Hap) into metakaolin/sludge based geopolymer adsorbent for simultaneous adsorption of Cu(II) and CIP. The effect of different filler loading of Hap (1–3 %) on the metakaolin/sludge geopolymerization and also on the removal efficiency of Cu(II) and CIP were studied in a single and binary system. Moreover, the effects of varied concentrations of Cu(II) (0–100 mg/L) on the removal efficiency of CIP were investigated. Characterization techniques such as x-ray diffraction (XRD), fourier-transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), brunauer-emmett-teller (BET) and neutron tomography imaging were employed to characterize the physicochemical properties of the synthesized geopolymer. It was found that the Hap content has a significant impact on the removal efficiency of CIP and Cu(II). The addition of 2 % Hap providing more nucleation site for the increasing geopolymerization (C-A-S-H) and silicoalumino phosphate gel (SAP) leading to the formation of highly cross-linked geopolymer network and abundant active sites which would favour the adsorption. Moreover, the removal efficiency of CIP by 2 % Hap-geopolymer increased (25.6 % to 61.51 %) with increasing Cu(II) concentration by the complexation and bridging effect between Cu(II) and CIP resulting in the formation of GMK25S1-2Hap-Cu(II)-CIP complexes. Therefore, the hybrid method of geopolymer and Hap is an exceptionally efficient approach for the treatment of wastewater that comprises Cu(II) and CIP.

View
No Thumbnail Available
Publication

Effect of aluminium powder on kaolin-based geopolymer characteristic and removal of Cu²⁺

2021 , Nurliyana Ariffin , Mohd. Mustafa Al Bakri Abdullah , Przemysław Postawa , Shayfull Zamree Abd. Rahim , Mohd Remy Rozainy Mohd Arif Zainol , Ramadhansyah Putra Jaya , Agata Śliwa , Mohd Firdaus Omar , Jerzy J. Wysłocki , Katarzyna Błoch , Marcin Nabiałek

This current work focuses on the synthesis of geopolymer-based adsorbent which uses kaolin as a source material, mixed with alkali solution consisting of 10 M NaOH and Na2SiO3 as well as aluminium powder as a foaming agent. The experimental range for the aluminium powder was between 0.6, 0.8, 1.0 and 1.2wt%. The structure, properties and characterization of the geopolymer were examined using X-Ray Diffraction (XRD), Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Adsorption capacity and porosity were analysed based on various percentages of aluminium powder added. The results indicate that the use of aluminium powder exhibited a better pore size distribution and higher porosity, suggesting a better heavy metal removal. The maximum adsorption capacity of Cu2+ approached approximately 98%. The findings indicate that 0.8% aluminium powder was the optimal aluminium powder content for geopolymer adsorbent. The removal efficiency was affected by pH, adsorbent dosage and contact time. The optimum removal capacity of Cu2+ was obtained at pH 6 with 1.5 g geopolymer adsorbent and 4 h contact time. Therefore, it can be concluded that the increase in porosity increases the adsorption of Cu2+.

View