Shahriman Abu Bakar
Thumbnail Image
Preferred name
Shahriman Abu Bakar
Official Name
Shahriman, Abu Bakar
Alternative Name
Bakar, Shahriman A.B.
Shariman, A. B.
Ab, Shahriman
Abu Bakar, S.
Bakar, A. S.
Bakar, S. A.
Bakar, Shahriman Abu
Bakar, Sharifah Adzila Syed Abu
Bakar, S. Abu
Main Affiliation
Scopus Author ID
57196198202
Researcher ID
ELT-0087-2022

Research Output

Filters

5 1
5
Reset filters

Settings
Now showing 1 - 5 of 5
  • Publication
    A review of the application and effectiveness of heat storage system using phase change materials in the built environment
    ( 2021-05-03)
    Ibrahim Z.
    ;
    Newby S.
    ;
    Hassani V.
    ;
    Ya'akub S.R.
    ;
    Shahriman Abu Bakar
    ;
    Zuradzman Mohamad Razlan
    ;
    Wan Khairunizam Wan Ahmad
    Global warming is the most significant threat that civilization faced within the 21st century. Buildings, which account for 40% of global consumption of energy and greenhouse gas emissions, play a key role in global warming. It is estimated that their destructive impact will grow by 1.8 percent per year by 2050, indicating that future energy consumption and emissions will be more critical than they are today. Therefore, the use of a latent heat storage system using phase change materials (PCM) is one of the effective ways of storing thermal energy and has the advantages of high-energy storage density and the isothermal nature of the storage process. PCM has been widely used in latent heat thermal storage systems for heat pumps, solar engineering, and spacecraft thermal control applications. Thermal energy conservation by latent heat is an ideal way to increase the thermal inertia of building envelopes, which would minimize temperature fluctuations, contributing to increased occupants' thermal comfort. For this reason, high-density PCM can be used effectively. This paper reviews recent studies of the application and effectiveness of using PCM in the built environment.
  • Publication
    Analysis of airbox performance improvement for Modenas model by geometrical analysis
    (IOP Publishing, 2017-10-29)
    Shahriman Abu Bakar
    ;
    Mohamad Syafiq Abdul Khadir
    ;
    Hamid K.A.
    ;
    Mohd Sani Mohamad Hashim
    ;
    Hazry Desa
    ;
    Zuradzman Mohamad Razlan
    ;
    Ruslizam Daud
    ;
    Cheng Ee Meng
    ;
    Siti Khadijah Za'aba
    ;
    Teh W.S.W.
    ;
    Shuaib N.A.
    ;
    Wan K.
    ;
    Ishak A.A.
    Airbox system consist of filter element which greatly influenced the quality air into the engine system. The main objective of this study is to improve the performance of airbox system that attached in MODENAS CT115S engine system. Airbox, an empty air chamber, accumulates the outside air and feed it to the cylinder of the engine for combustion process and contains filter element. The function is to provide cleaner air for greater combustion rate and cleaner emission. The performance of airbox can be influenced by changing the location of the filter element and the geometry of airbox. By changing these parameters, the performance of the airbox system can be enhanced. In this study, the geometry of the airbox inlet has been changed in terms of shape and size. The inlet shape for Design 1 in round shape with a diameter of 43.60 mm. Meanwhile for Design 2, the geometry of airbox inlet was changed to a rectangular shape. Between these two designs, Design 1 provides a better result in terms of mass flow rate (10.41 kg/s), velocity (9.84 m/s) and pressure difference (83.44 kPa). By increasing the performance of airbox, the performance of engine can be increased.
      6  15
  • Publication
    Design optimization of exhaust manifold's bending radius for Spark Ignition (SI) engine whrough CFD analysis on low end RPM 8sing Taguchi's method
    ( 2021-05-03)
    Murali R.
    ;
    Shahriman Abu Bakar
    ;
    Zuradzman Mohamad Razlan
    ;
    Nur Saifullah Kamarrudin
    ;
    Aziz I.A.
    ;
    Wan Khairunizam Wan Ahmad
    ;
    Ma'arof M.I.N.
    ;
    Bo L.L.
    ;
    Hassan M.A.S.
    Backpressure is considered as an obstruction on the flow of exhaust for any internal combustion (IC) engine. The level of backpressure can affect the amount of emissions and fuel consumption and the performance of the engine. Hence, the backpressure is considered a bad factor for an engine. Even though backpressure could not be eliminated completely, it could be minimized through design optimization of exhaust system. This paper shows the effects of exhaust manifold's bending radius of 115 cc spark ignition (SI) engine on low-end RPM. The aim of this study was to optimize the bending radius of exhaust manifold in order to minimize backpressure. CFD analysis was conducted to predict the backpressure of exhaust manifold samples based on design of experiment (DOE) through Taguchi's method. From the analysis result, it is observed that bending radius which is towards the outlet is the most contributing factor to the backpressure and the optimized exhaust manifold reduces backpressure by 10.5% from the existing design. The finding shows that the optimized design offers lower backpressure which could significantly reduce negative impacts to the engine's performance.
      2  21
  • Publication
    Heat transfer improvement in simulated small battery compartment using metal oxide (CuO)/deionized water nanofluid
    ( 2020-02-01)
    Bin-Abdun N.A.
    ;
    Zuradzman Mohamad Razlan
    ;
    Shahriman Abu Bakar
    ;
    Voon Chun Hong
    ;
    Ibrahim Z.
    ;
    Wan Khairunizam Wan Ahmad
    ;
    Mohd Ridzuan Mohd Jamir
    Improving the heat transfer coefficient of working fluids is essential for achieving the best performance of manufacturing systems. As a replacement of conventional working fluids, nanofluids have a high potential for improving this heat transfer coefficient. However, nanofluids are seldom implemented in actual systems, and several factors should be considered before actual application. Accordingly, this study investigated the thermophysical properties and heat transfer rate of CuO/deionized water nanofluid with and without sodium dodecyl sulfate (SDS) surfactants. Three different volumetric concentrations of the nanofluid were prepared using a two-step preparation method. The experimental steps were divided into two phases: static and dynamic. In these experiments, the thermophysical properties of the prepared nanofluids and the heat transfer coefficient were measured using an apparatus designed based on an actual heat exchanger for a lithium ion polymer battery compartment. The effects of flow rate and surfactants on the heat transfer rate of the nanofluids with varying volumetric concentrations of 0.08%, 0.16%, and 0.40% were analyzed. The results indicate that the heat transfer rate increases considerably as the flow rate increases from 0.5 L/min to 1.2 L/min and with the presence of surfactants. The highest heat transfer rate was obtained at a 0.40% volumetric concentration of CuO/deionized water nanofluid with SDS surfactant.
      1  34
  • Publication
    Simulation studies of the hybrid human-fuzzy controller for path tracking of an autonomous vehicle
    ( 2021-01-01)
    Halin H.
    ;
    Wan Khairunizam Wan Ahmad
    ;
    Haris H.
    ;
    Zuradzman Mohamad Razlan
    ;
    Shahriman Abu Bakar
    ;
    Zunaidi I.
    ;
    Wan Azani Wan Mustafa
    Human intelligence and experience help them in making a decision and recognize a pattern. This ability enables the driver to take action even in an unexpected situation. The hybrid integration between human intelligence/experience and machine controller able to improve the autonomous vehicle path tracking capability. The path tracking capability is the main concern of the autonomous vehicle. The Fuzzy developed from the experiment’s data. The experiments (human navigation experiments) used to gather the appropriate data from humans while controlling the buggy car. Data then use to develop the membership functions for inputs and output of the Fuzzy controller. The simulation uses to study the performance of the Fuzzy controller. The recorded path tracking error from the simulations for the right and left turn maneuver is 9 m and 7.5 m, respectively.
      24  1