Samila Mat Zali
Thumbnail Image
Preferred name
Samila Mat Zali
Official Name
Samila, Mat Zali
Alternative Name
Zali, Samila Mat
Mat Zali, Samila
Zali, S. M.
Mat Zali, S.
Main Affiliation
Scopus Author ID
6506906142

Research Output

Filters

5
Reset filters

Settings
Now showing 1 - 5 of 5
  • Publication
    Optimal design of photovoltaic power plant using hybrid optimisation: A case of South Algeria
    ( 2020-06-01)
    Zidane Tekai Eddine Khalil
    ;
    Mohd Rafi Adzman
    ;
    Mohammad Faridun Naim Tajuddin
    ;
    Samila Mat Zali
    ;
    Durusu, Ali
    ;
    Mekhilef, Saad
    Considering the recent drop (up to 86%) in photovoltaic (PV) module prices from 2010 to 2017, many countries have shown interest in investing in PV plants to meet their energy demand. In this study, a detailed design methodology is presented to achieve high benefits with low installation, maintenance and operation costs of PV plants. This procedure includes in detail the semi-hourly average time meteorological data from the location to maximise the accuracy and detailed characteristics of different PV modules and inverters. The minimum levelised cost of energy (LCOE) and maximum annual energy are the objective functions in this proposed procedure, whereas the design variables are the number of series and parallel PV modules, the number of PV module lines per row, tilt angle and orientation, inter-row space, PV module type, and inverter structure. The design problem was solved using a recent hybrid algorithm, namely, the grey wolf optimiser-sine cosine algorithm. The high performance for LCOE-based design optimisation in economic terms with lower installation, maintenance and operation costs than that resulting from the use of maximum annual energy objective function by 12%. Moreover, sensitivity analysis showed that the PV plant performance can be improved by decreasing the PV module annual reduction coefficient.
  • Publication
    Identifiability Evaluation of Crucial Parameters for Grid Connected Photovoltaic Power Plants Design Optimization
    ( 2021-01-01)
    Tekai Eddine Khalil Zidane
    ;
    Mohd Rafi Adzman
    ;
    Mohammad Faridun Naim Tajuddin
    ;
    Samila Mat Zali
    ;
    Ali Durusu
    ;
    Saad Mekhilef
    ;
    Chun-Lien Su
    ;
    Yacine Terriche
    ;
    Joseph M. Guerrero
    This paper aims to assess the impact of different key factors on the optimized design and performance of grid connected photovoltaic (PV) power plants, as such key factors can lead to re-design the PV plant and affect its optimum performance. The impact on the optimized design and performance of the PV plant is achieved by considering each factor individually. A comprehensive analysis is conducted on nine factors such as; three objectives are predefined, five recent optimization approaches, three different locations around the world, changes in solar irradiance, ambient temperature, and wind speed levels, variation in the available area, PV module type and inverters size. The performance of the PV plant is evaluated for each factor based on five performance parameters such as; energy yield, sizing ratio, performance ratio, ground cover ratio, and energy losses. The results show that the geographic location, a change in meteorological conditions levels, and an increase or decrease in the available area require the re-design of the PV plant. A change in inverter size and PV module type has a significant impact on the configuration of the PV plant leading to an increase in the cost of energy. The predefined objectives and proposed optimization methods can affect the PV plant design by producing completely different structures. Furthermore, most PV plant performance parameters are significantly changed due to the variation of these factors. The results also show the environmental benefit of the PV plant and the great potential to avoid green-house gas emissions from the atmosphere.
  • Publication
    An integrated of hydrogen fuel cell to distribution network system: Challenging and opportunity for D-STATCOM
    ( 2021-11-01)
    Khaleel M.M.
    ;
    Mohd Rafi Adzman
    ;
    Samila Mat Zali
    The electric power industry sector has become increasingly aware of how counterproduc-tive voltage sag affects distribution network systems (DNS). The voltage sag backfires disastrously at the demand load side and affects equipment in DNS. To settle the voltage sag issue, this paper achieved its primary purpose to mitigate the voltage sag based on integrating a hydrogen fuel cell (HFC) with the DNS using a distribution static synchronous compensator (D-STATCOM) system. Besides, this paper discusses the challenges and opportunities of D-STATCOM in DNS. In this paper, using HFC is well-designed, modeled, and simulated to mitigate the voltage sag in DNS with a positive impact on the environment and an immediate response to the issue of the injection of voltage. Furthermore, this modeling and controller are particularly suitable in terms of cost-effectiveness as well as reliability based on the adaptive network fuzzy inference system (ANFIS), fuzzy logic system (FLC), and proportional–integral (P-I). The effectiveness of the MATLAB simulation is confirmed by implementing the system and carrying out a DNS connection, obtaining efficiencies over 94.5% at three-phase fault for values of injection voltage in HFC D-STATCOM using a P-I controller. Moreover, the HFC D-STATCOM using FLC proved capable of supporting the network by 97.00%. The HFC D-STATCOM based ANFIS proved capable of supporting the network by 98.00% in the DNS.
  • Publication
    A Review of Fuel Cell to Distribution Network Interface Using D-FACTS: Technical Challenges and Interconnection Trends
    ( 2021-09-01)
    Khaleel M.M.
    ;
    Mohd Rafi Adzman
    ;
    Samila Mat Zali
    ;
    Graisa M.M.
    ;
    Ahmed A.A.
    Today, the worldwide public interest in reducing power quality issues and greenhouse gas emissions is a key driver to study fuel cells (FCs) connected to distribution network systems (DNs) based on distributed flexible alternating-current transmission systems (D-FACTS). DNs will need to develop a better performance on Power Quality (PQ) while providing a more efficient energy technology. This study reviewed in-depth the interface of DN to FC systems. By focusing on the FC interface and the associated technical challenges, this review may help reduce the risk of DNs, minimizing the consumption of fossil fuels for power generation, lowering the emission of hazardous gases while dramatically increasing electrical power loads, improving PQ and stability. Besides, the study deliberated aspects of FC power technology with DNs interfacing based on D-FACTS. Specifically, the discussion encompassed the configuration structures of FC power technology and DNs connection based on D-FACTS, technical challenges of DNs, and its trends to determine the diagnosis, integration, and optimization for FC power technology.
  • Publication
    PV array and inverter optimum sizing for grid-connected photovoltaic power plants using optimization design
    ( 2021-06-11)
    Zidane Tekai Eddine Khalil
    ;
    Samila Mat Zali
    ;
    Mohd Rafi Adzman
    ;
    Mohammad Faridun Naim Tajuddin
    ;
    Durusu A.
    This paper aims to select the optimum inverter size for large-scale PV power plants grid-connected based on the optimum combination between PV array and inverter, among several possible combinations. Inverters used in this proposed methodology have high-efficiency conversion in the range of 98.5% which is largely used in real large-scale PV power plants to increase the financial benefits by injecting maximum energy into the grid. To investigate the PV array-inverter sizing ratio, many PV power plants rated power are considered. The proposed method is based on the modelling of several parts of the PV power plant taking into account many design variables and constraints. The objective function is the levelized cost of energy (LCOE) and the optimization is performed by a multi-verse algorithm. The optimization method results in an optimum inverter size that depends on the PV plant rated capacity by providing an optimum number of inverters required in the installation site. The optimum sizing ratio (Rs) between PV array and inverter were found equal to 0.928, 0.904, and 0.871 for 1 MW, 1.5 MW, and more than 2 MW, respectively, whereas the total power losses reached 8% of the total energy generation during the PV power plant operational lifetime.