Roshazita Che Amat
Thumbnail Image
Preferred name
Roshazita Che Amat
Official Name
Roshazita, Che Amat
Alternative Name
Amat, Roshazita Che
Che Amat, Roshazita
Amat, R. C.
Che Amat, R.
Main Affiliation
Scopus Author ID
55749971400

Research Output

Filters

5
Reset filters

Settings
Now showing 1 - 5 of 5
Thumbnail Image
Publication

Effect of bottom ash and limestone on the optimum binder content in Hot Mix Asphalt (HMA)

2022-01-01 , Nur Liza Rahim , Syakirah Afiza Mohammed , Noor Aina Misnon , Nurhidayah Hamzah , Roshazita Che Amat , Norlia Mohamad Ibrahim , Christina Remmy Entalai , Deák György

One of the most effective and simplest methods to minimize waste as well as reduce the environmental problems associated with waste disposal is by utilizing waste materials as a cement replacement in hot mix asphalt (HMA) mixtures which can provide the same or better stability as the conventional method. Fillers play an important role in the stability and strength of the pavement by filling voids between the aggregate particles in the performance of the HMA mixture. This research investigated the effect of the utilization of different types of filler (bottom ash and limestone) on the optimum binder content of HMA. Flow, stability, stiffness, air void in mix (VIM) and void filled with bitumen (VFB) were determined using the Marshal Method test in order to determine the optimum binder content of HMA for all mineral filler. The results of the Marshall test for each filler have been compared with the JKR standard specification. The optimum binder content for bottom ash, limestone and Ordinary Portland Cement (OPC) was 5.42%, 5.65% and 5.54%, respectively. All values of mineral filler used meet the JKR standard specification, where the range is between 4 and 6%. From the result achieved, the bottom ash has the lower optimum binder content value compared to the limestone and OPC. When the lower binder content is used in the bituminous mixture, the cost for pavement construction will be reduced.

View
No Thumbnail Available
Publication

Reclamation and reutilization of incinerator Ash in artificial lightweight aggregate

2022-01-01 , Norlia Mohamad Ibrahim , Roshazita Che Amat , Mustaqqim Abdul Rahim , Nur Liza Rahim , Razak A.R.A.

This study focused on the reclamation of ash from incineration process and development of new artificial lightweight aggregate (LWA) that have comparable properties with existing natural coarse aggregate. The main objective of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded pelletization. Two types of incineration ash which is bottom ash (BA) and fly ash (FA) were collected from Cameron Highland Incineration Plant, Malaysia. The properties of BA and FA are studied by means of X-Ray Fluorescence (XRF) and microstructure of these ashes were inspected using Scanning Electron Microscope (SEM). The properties of BALA and FALA produced in this study is examined including loose bulk density, water absorption and aggregate impact value (AIV). From the results of both types of artificial LWA, the lowest loose bulk density of BALA is BALA50 with 564.14 kg/m3and highest is at 831.19 kg/m3. For FALA50, lowest loose bulk density is 573.64 kg/m3and highest is 703.35 kg/m3. Water absorption of BALA and FALA is quite similar with one another in with the value of 23.8% and 22.6%, respectively. Generally, FALA have better qualities of LWA comparing with BALA with lower bulk density and water absorption and can be categorized as strong aggregate. In summary, reclamation and reutilization of incinerator ash has generated acceptable qualities for artificial LWA. Both types of BA and FA shown a great potential to be recycled as additional materials in artificial aggregate production.

View
No Thumbnail Available
Publication

Effect of bottom Ash and limestone on the optimum binder content in Hot Mix Asphalt (HMA)

2022-01-01 , Nur Liza Rahim , Syakirah Afiza Mohammed , Misnon N.A. , Hamzah N. , Roshazita Che Amat , Norlia Mohamad Ibrahim , Entalai C.R. , Deák G.

One of the most effective and simplest methods to minimize waste as well as reduce the environmental problems associated with waste disposal is by utilizing waste materials as a cement replacement in hot mix asphalt (HMA) mixtures which can provide the same or better stability as the conventional method. Fillers play an important role in the stability and strength of the pavement by filling voids between the aggregate particles in the performance of the HMA mixture. This research investigated the effect of the utilization of different types of filler (bottom ash and limestone) on the optimum binder content of HMA. Flow, stability, stiffness, air void in mix (VIM) and void filled with bitumen (VFB) were determined using the Marshal Method test in order to determine the optimum binder content of HMA for all mineral filler. The results of the Marshall test for each filler have been compared with the JKR standard specification. The optimum binder content for bottom ash, limestone and Ordinary Portland Cement (OPC) was 5.42%, 5.65% and 5.54%, respectively. All values of mineral filler used meet the JKR standard specification, where the range is between 4 and 6%. From the result achieved, the bottom ash has the lower optimum binder content value compared to the limestone and OPC. When the lower binder content is used in the bituminous mixture, the cost for pavement construction will be reduced.

View
Thumbnail Image
Publication

Reclamation and Reutilization of Incinerator Ash in Artificial Lightweight Aggregate

2022 , Norlia Mohamad Ibrahim , Roshazita Che Amat , Mustaqqim Abdul Rahim , Nur Liza Rahim , Abdul Rahim Abdul Razak

This study focused on the reclamation of ash from incineration process and development of new artificial lightweight aggregate (LWA) that have comparable properties with existing natural coarse aggregate. The main objective of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded pelletization. Two types of incineration ash which is bottom ash (BA) and fly ash (FA) were collected from Cameron Highland Incineration Plant, Malaysia. The properties of BA and FA are studied by means of X-Ray Fluorescence (XRF) and microstructure of these ashes were inspected using Scanning Electron Microscope (SEM). The properties of BALA and FALA produced in this study is examined including loose bulk density, water absorption and aggregate impact value (AIV). From the results of both types of artificial LWA, the lowest loose bulk density of BALA is BALA50 with 564.14 kg/m3 and highest is at 831.19 kg/m3 . For FALA50, lowest loose bulk density is 573.64 kg/m3 and highest is 703.35 kg/m3 . Water absorption of BALA and FALA is quite similar with one another in with the value of 23.8% and 22.6%, respectively. Generally, FALA have better qualities of LWA comparing with BALA with lower bulk density and water absorption and can be categorized as strong aggregate. In summary, reclamation and reutilization of incinerator ash has generated acceptable qualities for artificial LWA. Both types of BA and FA shown a great potential to be recycled as additional materials in artificial aggregate production.

View
Thumbnail Image
Publication

Reclamation and Reutilization of Incinerator Ash in Artificial Lightweight Aggregate

2022-01-01 , Norlia Mohamad Ibrahim , Roshazita Che Amat , Mustaqqim Abdul Rahim , Nur Liza Rahim , Abdul Rahim Abdul Razak

This study focused on the reclamation of ash from incineration process and development of new artificial lightweight aggregate (LWA) that have comparable properties with existing natural coarse aggregate. The main objective of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded pelletization. Two types of incineration ash which is bottom ash (BA) and fly ash (FA) were collected from Cameron Highland Incineration Plant, Malaysia. The properties of BA and FA are studied by means of X-Ray Fluorescence (XRF) and microstructure of these ashes were inspected using Scanning Electron Microscope (SEM). The properties of BALA and FALA produced in this study is examined including loose bulk density, water absorption and aggregate impact value (AIV). From the results of both types of artificial LWA, the lowest loose bulk density of BALA is BALA50 with 564.14 kg/m3and highest is at 831.19 kg/m3. For FALA50, lowest loose bulk density is 573.64 kg/m3and highest is 703.35 kg/m3. Water absorption of BALA and FALA is quite similar with one another in with the value of 23.8% and 22.6%, respectively. Generally, FALA have better qualities of LWA comparing with BALA with lower bulk density and water absorption and can be categorized as strong aggregate. In summary, reclamation and reutilization of incinerator ash has generated acceptable qualities for artificial LWA. Both types of BA and FA shown a great potential to be recycled as additional materials in artificial aggregate production.

View