Romisuhani Ahmad
Thumbnail Image
Preferred name
Romisuhani Ahmad
Official Name
Romisuhani, Ahmad
Alternative Name
Ahmad, Romisuhani
Romisuhani, Ahmad
Romisuhani, A.
Ahmad, R.
Main Affiliation
Scopus Author ID
56354732400
Researcher ID
AAA-1058-2021

Research Output
Now showing 1 - 3 of 3
Thumbnail Image
Publication

Role of sintering temperature in production of nepheline Ceramics-Based geopolymer with addition of ultra-high molecular weight polyethylene

2021 , Romisuhani Ahmad , Fakhryna Hannanee Ahmad Zaidi , Mohd. Mustafa Al Bakri Abdullah , Wan Mastura Wan Ibrahim , Jitrin Chaiprapa , Kamarudin Hussin , Jerzy J. Wysłocki , Katarzyna Błoch , Marcin Nabiałek

The primary motivation of developing ceramic materials using geopolymer method is to minimize the reliance on high sintering temperatures. The ultra-high molecular weight polyethylene (UHMWPE) was added as binder and reinforces the nepheline ceramics based geopolymer. The samples were sintered at 900 °C, 1000 °C, 1100 °C, and 1200 °C to elucidate the influence of sintering on the physical and microstructural properties. The results indicated that a maximum flexural strength of 92 MPa is attainable once the samples are used to be sintered at 1200 °C. It was also determined that the density, porosity, volumetric shrinkage, and water absorption of the samples also affected by the sintering due to the change of microstructure and crystallinity. The IR spectra reveal that the band at around 1400 cm−1 becomes weak, indicating that sodium carbonate decomposed and began to react with the silica and alumina released from gels to form nepheline phases. The sintering process influence in the development of the final microstructure thus improving the properties of the ceramic materials.

View
Thumbnail Image
Publication

Crumb rubber geopolymer mortar at elevated temperature exposure

2022 , Ahmad Azrem Azmi , Mohd. Mustafa Al Bakri Abdullah , Che Mohd Ruzaidi Ghazali , Romisuhani Ahmad , Ramadhansyah Putra Jaya , Shayfull Zamree Abd. Rahim , Mohammad A. Almadani , Wysłocki, Jerzy J. , Agata Śliwa , Andre Victor Sandu

Low calcium fly ash is used as the main material in the mixture and the crumb rubber was used in replacing fine aggregates in geopolymer mortar. Sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) which were high alkaline solution were incorporated as the alkaline solution. The fly ash reacted with the alkaline solution forming alumino-silicate gel that binds the aggregate to produce a geopolymer mortar. The loading of crumb rubber in the fly ash based geopolymer mortar was set at 0%

View
Thumbnail Image
Publication

Synthesis of metakaolin based alkali activated materials as an adsorbent at different Na2SiO3/NaOH ratios and exposing temperatures for Cu2+ Removal

2023 , Masdiyana Ibrahim , Wan Mastura Wan Ibrahim , Mohd. Mustafa Al Bakri Abdullah , Marcin Nabialek , Ramadhansyah Putra Jaya , Monthian Setkit , Romisuhani Ahmad , Bartłomiej Jeż

Water contamination is a major issue due to industrial releases of hazardous heavy metals. Copper ions are among the most dangerous heavy metals owing to their carcinogenicity and harmful effects on the environment and human health. Adsorption of copper ions using alkali activated materials synthesized through the polycondensation reaction of an alkali source and aluminosilicates is the most promising technique, and has a high adsorption capability owing to a large surface area and pore volume. This research focuses on the effect of the alkaline activator ratio, which is a sodium silicate to sodium hydroxide ratio. Various exposing temperatures on metakaolin based alkali activated materials on a surface structure with excellent functional properties can be used as adsorbent materials for the removal of copper ions. A variety of mix designs were created with varying sodium silicate to sodium hydroxide ratios, with a fixed sodium hydroxide molarity, metakaolin to alkali activator ratio, hydrogen peroxide, and surfactant content of 10 M, 0.8, 1.00 wt%, and 3.0 wt%, respectively. Most wastewater adsorbents need high sintering temperatures, requiring an energy-intensive and time-consuming manufacturing process. In this way, metakaolin-based alkali activated materials are adsorbent and may be produced easily by solidifying the sample at 60 °C without using much energy. The specific surface area, water absorption, microstructure, phase analysis, functional group analysis, and adsorption capability of copper ions by metakaolin based alkali activated materials as adsorbents were evaluated. The water absorption test on the samples revealed that the sodium silicate to sodium hydroxide 0.5 ratio had the highest water absorption percentage of 36.24%, superior pore size distribution, and homogeneous porosity at 60 °C, with a surface area of 24.6076 m2/g and the highest copper ion uptake of 63.726 mg/g with 95.59% copper ion removal efficiency at adsorption condition of pH = 5, a dosage of 0.15 g, 100 mg/L of the initial copper solution, the temperature of 25 °C, and contact time of 60 min. It is concluded that self-supported metakaolin based alkali activated material adsorbents synthesized at low temperatures effectively remove copper ions in aqueous solutions, making them an excellent alternative for wastewater treatment applications.

View