Romisuhani Ahmad
Thumbnail Image
Preferred name
Romisuhani Ahmad
Official Name
Romisuhani, Ahmad
Alternative Name
Ahmad, Romisuhani
Romisuhani, Ahmad
Romisuhani, A.
Ahmad, R.
Main Affiliation
Scopus Author ID
56354732400
Researcher ID
AAA-1058-2021

Research Output
Now showing 1 - 2 of 2
Thumbnail Image
Publication

Role of sintering temperature in production of nepheline ceramics-based geopolymer with addition of ultra-high molecular weight polyethylene

2021 , Romisuhani Ahmad , Mohd. Mustafa Al Bakri Abdullah , Jitrin Chaiprapa , Kamarudin Hussin , Wan Mastura Wan Ibrahim , Fakhryna Hannanee Ahmad Zaidi , Jerzy J. Wysłocki , Katarzyna Błoch , Marcin Nabiałek

The primary motivation of developing ceramic materials using geopolymer method is to minimize the reliance on high sintering temperatures. The ultra-high molecular weight polyethylene (UHMWPE) was added as binder and reinforces the nepheline ceramics based geopolymer. The samples were sintered at 900 °C, 1000 °C, 1100 °C, and 1200 °C to elucidate the influence of sintering on the physical and microstructural properties. The results indicated that a maximum flexural strength of 92 MPa is attainable once the samples are used to be sintered at 1200 °C. It was also determined that the density, porosity, volumetric shrinkage, and water absorption of the samples also affected by the sintering due to the change of microstructure and crystallinity. The IR spectra reveal that the band at around 1400 cm−1 becomes weak, indicating that sodium carbonate decomposed and began to react with the silica and alumina released from gels to form nepheline phases. The sintering process influence in the development of the final microstructure thus improving the properties of the ceramic materials.

View
Thumbnail Image
Publication

Role of sintering temperature in production of nepheline ceramics-based geopolymer with addition of ultra-high molecular weight polyethylene

2022 , Romisuhani Ahmad , Mohd. Mustafa Al Bakri Abdullah , Wan Mastura Wan Ibrahim , Kamarudin Hussin , Jitrin Chaiprapa , Jerzy J. Wysłocki , Katarzyna Błoch , Fakhryna Hannanee Ahmad Zaidi , Marcin Nabiałek

The primary motivation of developing ceramic materials using geopolymer method is to minimize the reliance on high sintering temperatures. The ultra-high molecular weight polyethylene (UHMWPE) was added as binder and reinforces the nepheline ceramics based geopolymer. The samples were sintered at 900 °C, 1000 °C, 1100 °C, and 1200 °C to elucidate the influence of sintering on the physical and microstructural properties. The results indicated that a maximum flexural strength of 92 MPa is attainable once the samples are used to be sintered at 1200 °C. It was also determined that the density, porosity, volumetric shrinkage, and water absorption of the samples also affected by the sintering due to the change of microstructure and crystallinity. The IR spectra reveal that the band at around 1400 cm−1 becomes weak, indicating that sodium carbonate decomposed and began to react with the silica and alumina released from gels to form nepheline phases. The sintering process influence in the development of the final microstructure thus improving the properties of the ceramic materials.

View