Nur Farhana Diyana Mohd Yunos
Thumbnail Image
Preferred name
Nur Farhana Diyana Mohd Yunos
Official Name
Nur Farhana Diyana, Mohd Yunos
Alternative Name
Yunos, Nur Farhana Mohd
Yunos, Nur Farhana M.
Mohd Yunos, Nur Farhana
Yunos, N. F.
Yunos, N. F.M
Nur Yunos, F.
Yunos, Nur F.
Yunos, N. F.D.M.
Yunos, M.
Yunus, Nur Farhana M.
Main Affiliation
Scopus Author ID
44062005100
Researcher ID
I-2598-2019

Research Output

Filters

3 1 1
1
3
Reset filters

Settings
Now showing 1 - 3 of 3
Thumbnail Image
Publication

Phase reduction and thermodynamic analysis of Ilmenite Ore by carbothermal-iodination using different carbon reductants

2023-12 , N. A. Nasrun , Nur Farhana Diyana Mohd Yunos , Muhammad Asri Idris , Sri Raj Rajeswari Munusamy , N. Takahiro , S. A. Rezan

The present study is on the combination of carbothermal reduction and iodination reaction (carboiodination) process for the phase reduction of ilmenite ore (FeTiO3). The aim is to understand the phase reduction and thermodynamic reaction analysis of ilmenite ore by a combined method of carbothermal-iodination using different carbon reductants (graphite and palm char). Graphite was used as a standard carbon reductant while palm char as a renewable carbon reductant was prepared via the pyrolysis technique. Ilmenite was mixed with carbon reductants and then first reduced by using a carbothermal reduction process at 1550℃. Then, the reduced samples were further investigated with iodination reaction in different temperature ranges of 900-1000 °C using a vertical tube furnace with mixed argon and iodine gas (0.2 L/min). The proximate and ultimate analyses of carbon reductants were analysed by CHON analyser and their microstructure by using SEM, while XRF and XRD were used for analyzing the chemical compositions and the phase reductions of raw ilmenite ore and reduced samples, respectively. The thermodynamics of possible reactions during carbothermal-iodination reactions were calculated by HSC Chemistry 6.0 software. By comparing graphite and palm char, palm char had an amorphous structure, with porous and high carbon content showing high potential for usage as a reductant in titanium extraction from ilmenite ore. The phases of ilmenite ore were ilmenite, rutile, and anatase transformed into rutile, pseudobrookite, and titanium oxide detected by XRD. Further reduction was performed by palm char where more rutile (TiO2) and titanium oxide (Ti3O5) developed from the iodination reaction at the highest temperature compared to graphite due to better properties and amorphous structure. The rutile and titanium oxide were found as stable phases from the thermodynamic analysis and confirmed with XRD. From the findings, the combination of carbothermal-iodination of ilmenite ore was possible and promising for rutile (TiO2) production in mineral extractions.

View
Thumbnail Image
Publication

Investigation on phase evaluation of ilmenite ore by carbothermal reduction and carboiodination reaction

2023-12 , A. A. Adel , Nur Farhana Diyana Mohd Yunos , Muhammad Asri Idris , L. I. G. Togang

This article presented the thermochemical calculation and experimental investigation on the phase evaluation of ilmenite ore (FeTiO3) via carbothermal reduction and carboiodination reaction for titanium production using graphite as a reducing agent. The carbothermal reduction and carboiodination reactions were performed in two different furnaces. The carbothermal reduction was evaluated at a temperature of 1550°C with inert argon gas utilizing a horizontal tube furnace. The carboiodination reactions were evaluated in temperatures ranging from 900°C, 950°C, and 1000°C using a vertical tube furnace with mixed iodine gas with argon gas. XRF and XRD were used for analyzing the chemical compositions and the phase evolutions of raw ilmenite ore and the reduced samples, respectively. The findings showed that the Perak ilmenite ore predominantly has a greater concentration of TiO2 (71.27wt%), Fe2O3 (18.85wt%), and some other oxides like aluminum oxide and quartz. In addition, XRD revealed that the ilmenite phase was converted into rutile (TiO2) titanium oxide (Ti3O5, Ti2O3), titanium carbide (TiC), and iron (Fe) phases, after the carbothermal reduction process. However, after the carboiodination reaction, the ilmenite and rutile phases remained at temperatures 900°C, 950°C, and 1000°C. The HSC Chemistry software was used in the determination of the thermochemical calculation and the possible reactions during the reaction which play an important role in shortening the reduction process. The results revealed the carboiodination process is a promising process that can reduce energy consumption and shorten the titanium production processes, and it needs more studies.

View
No Thumbnail Available
Publication

Phase evolution during carbothermal reduction of langkawi ilmenite ore at different reaction times

2020-01-01 , Nur Farhana Diyana Mohd Yunos , Chong J.H. , Mohamed A.I. , Muhammad Asri Idris

In this research, the carbothermal reduction of Langkawi ilmenite ore, FeTiO3 had been conducted by using coke as carbon reductant. All samples were grinded into size of ≤ 63 µm and pelletized using 2.5 g mixture of ilmenite ore with coke based on C/O molar ratio of 1:3 (carbon to reducible oxygen). The carbothermal reduction was conducted in a horizontal tube furnace using 0.1 L/min of argon gas flow at temperature of 1200°C. The ultimate and proximate analysis of carbon reductant was investigated using carbon, hydrogen, oxygen, nitrogen and sulfur (CHONS) analyzer. The phase evolutions and chemical composition analysis was conducted using X-ray diffraction (XRD) and X-ray fluorescence (XRF) for raw ilmenite and reduced ilmenite with coke, respectively. The reduction time was set with 2, 3 and 4 hours to understand the phase evolutions. It was found that Langkawi ilmenite ore contained mainly higher TiO2 and hematite, Fe2O3 where the phases of FeTiO3 and titanomagnetite, (Fe2TiO4-Fe3O4) were detected using XRD. The phase of FeTiO3 evolved into the production of Fe, FeO, TiC, TiO2 and Fe3C when increased the reduction time from 2 to 4 hours. The amount of Fe2O3 production was decreased from 59.16 to 47.02 wt%, while higher value of TiO2 was obtained, increasing from 25.2 to 29.1 wt% due to the reduction of TiO2 to Ti3O5 as the reduction time increased. TiC content is also detected when the reduction time increased by reducing TiCxOy into TiC.

View