Norshah Afizi Shuaib
Thumbnail Image
Preferred name
Norshah Afizi Shuaib
Official Name
Norshah Afizi, Shuaib
Alternative Name
Shuaib, N. A.
Shuaib, Norshah Afizi Bin
Shuaib, Norshah Afizi
Afizi Shuaib, Norshah
Main Affiliation
Scopus Author ID
54939913100
Researcher ID
CFT-7632-2022

Research Output

Filters

2
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    Implementation of fault tree analysis (FTA) in production process: a wood-based industry case study
    (AIP Publishing, 2023)
    Z. N. R. Aina
    ;
    A. S. Sharizal
    ;
    Norshah Afizi Shuaib
    ;
    H. M. Hendra
    ;
    Mohammad Radzif Taharin
    Fault Tree Analysis (FTA) is one of the tools used by various industries such as aerospace, oil and gas, automotive and other high-hazard risk industries to consider the rationale that leads to undesired condition or occurrence. It can also be used to reduce and maximize capital in the production process. This case study evaluates the issue by using the fault tree analysis (FTA) to increase the performance of the manufacturing cycle of a local business in Selangor, Malaysia. The approach helps to define the cause and impact of the product in the production process. The company has been searching for efficient ways to improve the productivity of its output. Potential causes and consequences have been identified during the study period. Based on the results, the company will consider finding strategies for managing input and output of production.
  • Publication
    Preliminary Investigation of Delamination Factor for Drilling Wood Plastic Composites (WPC)
    ( 2020)
    Muhammad Amirul Zuraik
    ;
    Sharizal Ahmad Sobri
    ;
    Nik Asmawie Nik Abdullah
    ;
    Andi Hermawan
    ;
    Mazlan Mohamed
    ;
    Norshah Afizi Shuaib
    This study examines the effect of the delamination factor on wood composite drilling. Drilling is one of the most important machining operations in the manufacturing process, operating in a variety of ways to make life better every day. The preliminary experiment focuses on the implementation of three drilling strategies to determine the most appropriate for drilling composite and to identify the effect of the machining parameters of wood plastic composite (WPC) drilling. The CNC machining centre is used at the factory of the local company to assist them in the provision of certain production inputs. It is observed that the single step drill peck is the best suited strategy for drill WPC with less delamination at the entrance and exit holes compared to the other two methods, 2-peck and 4-peck drills. Hole tends to create a peel-up and to force the delamination down heavily along the hole edge when using the 4-peck process while the least peel-up pattern happens when using a single-step method. The findings also show a large amount of peel-up delamination as the feed rate increases. Therefore, the final results are also useful in understanding the relationship between the drilling parameters and the cutting experiments.
      3  14