Noorina Hidayu Jamil
Thumbnail Image
Preferred name
Noorina Hidayu Jamil
Official Name
Noorina Hidayu, Jamil
Alternative Name
Jamil, Noorina Hidayu
Noorina, H. J.
Noorina, J. H.
Jamil, N. H.
Main Affiliation
Scopus Author ID
25639632500
Researcher ID
FBC-8988-2022

Research Output
Now showing 1 - 3 of 3
No Thumbnail Available
Publication

Sustainable geopolymer adsorbents utilizing silica fume as a partial replacement for metakaolin in the removal of copper ion from synthesized copper solution

2025-07 , Pilomeena Arokiasamy , Mohd. Mustafa Al Bakri Abdullah , Eva Arifi , Noorina Hidayu Jamil , Md Azree Othuman Mydin , Andrei Victor Sandu , Shayfull Zamree Abd. Rahim , Shafiq Ishak

Biochar has great significance for controlling heavy metal pollution. Nevertheless, its application is impeded by certain shortcomings, such as a limited adsorption capacity, a slow adsorption rate, and poor reusability. Besides, the physical adsorption capacity of raw biochar to heavy metals is suboptimal. As a result, researchers prefer to use geopolymer-based adsorbents for the removal of heavy metals due to their excellent immobilization effect. However, no research has been done on the synthesis of geopolymer-based adsorbent using silica fume for heavy metal adsorption. Thus, the aim of this study is to partially replace metakaolin (MK) with silica fume (S1) (25, 50, 75 and 100 %) in geopolymer formulation at varied S:L ratio (0.4, 0.6, 0.8 and 1.0) to study the impact on the geopolymerization and its following properties in the removal efficiency of copper (Cu2 +). Characterization techniques such as Energy dispersive X-ray fluorescence (EDXRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM) and Energy dispersive X-ray spectroscopy (EDX) were used to study the physicochemical properties of the developed geopolymer. The concentration of Cu2+ before and after adsorption was determined by Atomic absorption spectroscopy (AAS) and the removal efficiency was calculated. Based on the experimental result, the geopolymer prepared with 25 % MK and 75 % S1 at S:L of 0.6 maintained the high removal efficiency of Cu2+ (99.62 %) with 100 % MK geopolymer (98.56 %). The generation of N-A-S-H gel with the 75 % replacement level of S1 producing more reactive Si and Al binding sites for Cu2+ adsorption. In addition, S1 contains exchangeable cations such as Ca2+, Mg2+ and Na+ which further promote the adsorption of Cu2+ by ion exchange. Moreover, the mechanisms such as chemical bonding and precipitation were involved in the adsorption of Cu2+. Hence, this research could serve as a basis for the development of solid waste based geopolymers that could remove heavy metal ions from aqueous solution.

View
Thumbnail Image
Publication

Metakaolin/sludge based geopolymer adsorbent on high removal efficiency of Cu2+

2022 , Pilomeena Arokiasamy , Mohd. Mustafa Al Bakri Abdullah , Shayfull Zamree Abd. Rahim , Mohd Remy Rozainy Mohd Arif Zainol , Mohd Arif Anuar Mohd Salleh , Marwan Kheimi , Jitrin Chaiprapa , Andrei Victor Sandu , Petrica Vizureanu , Rafiza Abd Razak , Noorina Hidayu Jamil

Activated carbon (AC) has received a lot of interest from researchers for the removal of heavy metals from wastewater due to its abundant porous structure. However, it was found unable to meet the required adsorption capacity due to its amorphous structure which restricts the fundamental studies and structural optimization for improved removal performance. In addition, AC is not applicable in large scale wastewater treatment due its expensive synthesis and difficulty in regeneration. Thus, the researchers are paying more attention in synthesis of low cost geopolymer based adsorbent for heavy metal removal due its excellent immobilization effect. However, limited studies have focused on the synthesis of geopolymer based adsorbent for heavy metal adsorption by utilizing industrial sludge. Thus, the aim of this research was to develop metakaolin (MK) based geopolymer adsorbent with incorporation of two types of industrial sludge (S1 and S3) that could be employed as an adsorbent for removing copper (Cu2+) from aqueous solution through the adsorption process. The effects of varied solid to liquid ratio (S/L) on the synthesis of metakaolin/sludge based geopolymer adsorbent and the removal efficiency of Cu2+ by the synthesis adsorbent were studied. The raw materials and synthesized geopolymer were characterized by using x-ray fluorescence (XRF), x-ray diffraction (XRD), scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) and micro XRF. The concentration of Cu2+ before and after adsorption was determined by atomic absorption spectroscopy (AAS) and the removal efficiency was calculated. The experimental data indicated that the synthesized geopolymer at low S/L ratio has achieved the highest removal efficiency of Cu2+ about 99.62 % and 99.37 % at 25 %:75 % of MK/S1 and 25 %:75 % of MK/S3 respectively compared to pure MK based geopolymer with 98.56 %. The best S/

View
Thumbnail Image
Publication

Metakaolin/sludge based geopolymer adsorbent on high removal efficiency of Cu2+

2022 , Pilomeena Arokiasamy , Mohd. Mustafa Al Bakri Abdullah , Shayfull Zamree Abd. Rahim , Mohd Remy Rozainy Mohd Arif Zainol , Mohd Arif Anuar Mohd Salleh , Marwan Kheimi , Andrei Victor Sandu , Petrica Vizureanu , Rafiza Abdul Razak , Noorina Hidayu Jamil

Activated carbon (AC) has received a lot of interest from researchers for the removal of heavy metals from wastewater due to its abundant porous structure. However, it was found unable to meet the required adsorption capacity due to its amorphous structure which restricts the fundamental studies and structural optimization for improved removal performance. In addition, AC is not applicable in large scale wastewater treatment due its expensive synthesis and difficulty in regeneration. Thus, the researchers are paying more attention in synthesis of low cost geopolymer based adsorbent for heavy metal removal due its excellent immobilization effect. However, limited studies have focused on the synthesis of geopolymer based adsorbent for heavy metal adsorption by utilizing industrial sludge. Thus, the aim of this research was to develop metakaolin (MK) based geopolymer adsorbent with incorporation of two types of industrial sludge (S1 and S3) that could be employed as an adsorbent for removing copper (Cu²⁺) from aqueous solution through the adsorption process. The effects of varied solid to liquid ratio (S/L) on the synthesis of metakaolin/sludge based geopolymer adsorbent and the removal efficiency of Cu²⁺ by the synthesis adsorbent were studied. The raw materials and synthesized geopolymer were characterized by using x-ray fluorescence (XRF), x-ray diffraction (XRD), scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) and micro XRF. The concentration of Cu²⁺ before and after adsorption was determined by atomic absorption spectroscopy (AAS) and the removal efficiency was calculated. The experimental data indicated that the synthesized geopolymer at low S/L ratio has achieved the highest removal efficiency of Cu²⁺ about 99.62% and 99.37% at 25%:75% of MK/S1 and 25%:75% of MK/S3 respectively compared to pure MK based geopolymer with 98.56%. The best S/L ratio for MK/S1 and MK/S3 is 0.6 at which the reaction between the alkaline activator and the aluminosilicate materials has improved and enhanced the geopolymerization process. Finally, this work clearly indicated that industrial sludge can be utilized in developing low-cost adsorbent with high removal efficiency

View