Fahmi Muhammad Ridwan
Thumbnail Image
Preferred name
Fahmi Muhammad Ridwan
Official Name
Fahmi, Muhammad Ridwan
Alternative Name
Fahmi, Muhammad Ridwan
Fahmi, M. R.
Fahmi, R. M.
Main Affiliation
Scopus Author ID
57224170122
Researcher ID
F-5541-2011

Research Output

Filters

5
5
Reset filters

Settings
Now showing 1 - 5 of 5
Thumbnail Image
Publication

Reactive Green 19 degradation using O3/S2 O8(2-) process: Intermediates and proposed degradation pathway

2022-01-01 , Mohd Razali N.A. , Che Zulzikrami Azner Abidin , Ong Soon An , Fahmi Muhammad Ridwan , Abdul Haqi Ibrahim , Siti Nasuha Sabri , Kow Su Huan , Safya Abdul Malik

The massive drawbacks of conventional wastewater treatment have led to a demand investigation about new advanced wastewater treatment technology. The issue can be addressed via advanced oxidation processes (AOPs) as witnessed recently. Therefore, the objective of this study was to investigate the performance of ozone/persulfate ((Formula presented.)) process to assess its use as potential degradation of diazo dye which is Reactive Green 19 (RG19). In this work, efficiency, color, and COD removal were investigated over a range of initial pH, persulfate concentration and initial concentration of RG19. The amount of sodium persulfate ((Formula presented.)) was varied at different levels (20–100 mM) relative to precursor radical to assess the optimum usage of persulfate concentration for RG19 degradation. Evidence that RG19 could degrade efficiently had occurred at 100 mg/L, initial pH 9, 60 mM persulfate concentration was identified by FTIR and GC/MS analysis. The results revealed that RG19 could achieve complete decolorization easily as compared to mineralization. In addition, RG19 degradation pathway gave the best representation of level degradation. The GC/MS and FTIR results exhibited the proposed RG19 degradation pathway that involved the characteristic of sulfonic group, (Formula presented.) accompanied with (Formula presented.) became as an indicator of their structure broken down one by one. The degradation products such as oxalic acid, formic acids and others were analyzed and finally converted to carbon dioxide and water. The diazo dye structure itself aided with (Formula presented.) has its superior characteristic as an aid for the efficient degradation process.

View
Thumbnail Image
Publication

Removal of palm oil mill effluent by using electro-oxidation process

2020-06-10 , Che Zulzikrami Azner Abidin , Sabri S.N. , Fahmi Muhammad Ridwan , Bashir Mohammed J.K. , Abdul Haqi Ibrahim , Nazerry Rosmady Rahmat , Mohamed Hussein N.F. , Mahiran N.Q.

Wastewater includes the Palm Oil Mill Effluent (POME) that gives adverse impacts to the environment especially for water pollution when it is not treated properly. POME are known to have various types of liquids, residual oil and suspended solid as it has very high strength waste in its untreated form. Although conventional biological processes are normally efficient for the degradation of pollutants occurring in wastewater, most of these compounds are not effectively removed. As a result, further treatment is needed to meet more stringent discharge standards of Department of Environment (DOE). This research focused on treatment of POME by using electro-oxidation process (EO). It was done to identify the performance of EO process for colour, chemical oxygen demand (COD), suspended solids (SS), ammoniacal-nitrogen (NH3-N), and turbidity removal as well as the relative effects of different operational parameters such as pH, type of electrodes and contact time. The pH was varied from 3 to 11, the electrodes were aluminium and iron and the contact time was from 0 to 120 min. The most suitable pH, contact time and type of electrode were pH 3, 120 min and Al electrode.

View
Thumbnail Image
Publication

Influence of leachate matrix on oxidation performance of ozonation and aops

2022-12-15 , Kow Su Huan , Fahmi Muhammad Ridwan , Che Zulzikrami Azner Abidin , Najihah Abdul Rashid , Naimah Ibrahim , Abdul Haqi Ibrahim , Ong Soon An , Wikurendra E.A. , Handayani D.

Landfill leachate is a critical environmental issue that should be adequately treated to prevent it from spreading to the environment. This study explored the influence of raw leachate matrix and treated leachate matrix on O3, O3/H2O2, and O3/PS performance. O3 and AOPs were conducted in a laboratory-scale batch reactor. The findings showed the degradation of p-cresol, COD, and humic substances was much slower in treated leachate matrix than in raw leachate matrix. However, color was found easier to remove in treated leachate. The results revealed a synergic effect between molecular O3 and dissolved organic matter in the raw leachate as the O3 performance was enhanced in the presence of raw leachate matrix, except for color removal. The highest degradation of more than 90% was achieved in O3 /H2 O2 to remove COD, p-cresol, and humic substances, although it is the most affected by the leachate matrix. This study provides vital insight into the notable performance of O3 /PS in color removal regardless of the influence of leachate matrix, suggesting that the sulfate radical-induced oxidation outperformed O3 and O3 /H2 O2 in reducing nitrogen-containing compounds.

View
Thumbnail Image
Publication

Recovery of nano-lignin from anaerobic treated palm oil mill effluent (AT-POME)

2020-06-10 , Ismail H.S. , Abdul Haqi Ibrahim , Che Zulzikrami Azner Abidin , Fahmi Muhammad Ridwan

Lignin is the main polymers in woody biomass aside cellulose and hemicelluloses Recently, nano-lignin is gaining importance due to the increasing demand for bio-based and bio-active nanomaterial fillers for many applications such as in composite and textile industries. Palm oil mill effluent (POME) is the main wastewater produce by palm oil mills. Anaerobically treated (AT-POME) contains high soluble lignin due to the anaerobic digestion of cellulosic material in POME. Nano-lignin was precipitated by adjusting the initial pH of AT-POME during the sonication process. Sulfuric acid (H2SO4), nitric acid (HNO3), hydrochloric acid (HCl) and phosphoric acid (H3PO4) were used to adjust the initial pH of AT-POME. Result shows that sulfuric acid was the most suitable acid to be used as it could recovered 96% of the soluble lignin in AT-POME. The presence of ultrasonic during the precipitation process had reduced the size to 383.4 nm. The optimum operating parameter for lignin recovery is at pH 4 using sulfuric acid and sonicated at 80 watts for 15 minutes. This study shows that sonication could reduce the size of precipitated lignin from AT-POME. In addition, removal of lignin from AT-POME also reduced the COD content of AT-POME.

View
Thumbnail Image
Publication

Influence of leachate matrix on oxidation performance of ozonation and aops

2022-12-15 , Kow S.H. , Fahmi Muhammad Ridwan , Che Zulzikrami Azner Abidin , Najihah Abdul Rashid , Naimah Ibrahim , Abdul Haqi Ibrahim , Ong Soon An , Wikurendra E.A. , Handayani D.

Landfill leachate is a critical environmental issue that should be adequately treated to prevent it from spreading to the environment. This study explored the influence of raw leachate matrix and treated leachate matrix on O3, O3/H2O2, and O3/PS performance. O3 and AOPs were conducted in a laboratory-scale batch reactor. The findings showed the degradation of p-cresol, COD, and humic substances was much slower in treated leachate matrix than in raw leachate matrix. However, color was found easier to remove in treated leachate. The results revealed a synergic effect between molecular O3 and dissolved organic matter in the raw leachate as the O3 performance was enhanced in the presence of raw leachate matrix, except for color removal. The highest degradation of more than 90% was achieved in O3 /H2 O2 to remove COD, p-cresol, and humic substances, although it is the most affected by the leachate matrix. This study provides vital insight into the notable performance of O3 /PS in color removal regardless of the influence of leachate matrix, suggesting that the sulfate radical-induced oxidation outperformed O3 and O3 /H2 O2 in reducing nitrogen-containing compounds.

View