Asmawi Sanuddin
Thumbnail Image
Preferred name
Asmawi Sanuddin
Official Name
Asmawi, Sanuddin
Alternative Name
Sanuddin, A. B.
Sanuddin, Asmawi
Bin Sanuddin, Asmawi
Sanuddin, A. B.
Main Affiliation
Scopus Author ID
35369408500
Researcher ID
FTZ-4288-2022

Research Output

Filters

2
2
2
2
Reset filters

Settings
Now showing 1 - 2 of 2
  • Publication
    Experimental Performance of R134a/SiO2 in Refrigeration System for Domestic Use
    ( 2022-01-01)
    Mohd Hisham Che Hussin
    ;
    Sa'adah Ahmad @ Ahmad Sowi
    ;
    Muhammad Adlin Syahar Mahadi
    ;
    Asmawi Sanuddin
    ;
    Ahmad Nabil Mohd Khalil
    ;
    Yuzairi Abdul Rahim
    Nanofluids are considered as a new invention of fluids having superior thermal physical properties to improve efficiency of the refrigeration system. Nanofluids are the colloidal suspensions of nanoparticles in base fluid. Nanoparticles having higher thermal conductivity compared to pure refrigerant such as R134a can be added to pure refrigerant to improve the performance of refrigeration system. This study focuses on producing nanolubricant (SiO2/POE) and implementing the nanolubricant into refrigeration system. The nanoparticles will be homogenized in refrigerant to produce nanoRefrigerant (R134a/SiO2) at the attached reservoir. The aim of the research is to study the thermal physical properties of nanolubricant and to find the relationship between nanoparticles’ volume fraction to the Coefficient of Performance (COP) of the refrigeration system. The investigations are focused on the effects of nanoparticles with 0.1, 0.3%, 0.7% and 0.9% volume fraction to the performance of the refrigeration system. The results show that the usage of nanolubricant creates higher thermal conductivity with slightly higher dynamic viscosity which eventually increase the performance of the refrigeration system by 8.62% in term of COP.
      2
  • Publication
    Tensile Properties of 3D Printed Recycled PLA Filament: A Detailed Study on Filament Fabrication Parameters
    ( 2023-10-01)
    Sanusi Hamat
    ;
    Ishak M.R.
    ;
    Salit M.S.
    ;
    Yidris N.
    ;
    Syamir Alihan Showkat Ali
    ;
    Mohd Sabri Hussin
    ;
    Maliki Ibrahim
    ;
    Asmawi Sanuddin
    Polylactic acid (PLA), a biodegradable and biocompatible thermoplastic commonly utilized in 3D Printing filaments, undergoes changes in properties upon recycling. The objective was to elucidate the role of extrusion temperature and screw speed in modulating the quality of recycled PLA filament, as well as in controlling its dimensional attributes. Recycled PLA pellets (3D850D) were extruded using a single filament extruder machine within an extrusion temperature range of 145°C to 165°C and a screw speed varying from 2 rpm to 6 rpm. The extruded filaments were subsequently 3D printed into specimens adopting a 0° raster angle, line infill pattern, and a 100 percent infill density, then tested as per ASTM D638 mechanical standards. The study revealed a profound influence of extrusion parameters on the filament's ultimate tensile strength, yield strength, and diameter. Optimal extrusion conditions-155°C and 5 rpm-resulted in maximum mechanical strengths, while the parameters yielding filament diameters closest to commercial standards were identified as 5 rpm and 155°C. These results under-score the possibility of optimizing the recycled PLA filament's properties through adept control of extrusion parameters. Consequently, this investigation supports the potential use of recycled PLA filament in the 3D printing industry as a sustainable and performance-efficient material, offering a tangible step towards environmentally friendly additive manufacturing practices.
      1